Tag Archives: bearing for

China Hot selling Good-Quality High-Frequency Rail Shaft for Needle Bearing dimple shaft for set screw

Product Description

screw jack

How do screw jacks handle challenges like load imbalance or uneven surfaces?

Screw jacks are designed to handle challenges such as load imbalance or uneven surfaces through various mechanisms and features. Here’s how screw jacks address these challenges:

  • Load Imbalance: Screw jacks can handle load imbalance by distributing the load evenly across multiple screw jacks. In applications where there is a significant load imbalance, multiple screw jacks can be used in a synchronized system. The synchronization ensures that each screw jack shares the load proportionally, preventing excessive stress on any individual screw jack.
  • Self-Locking: Screw jacks have a self-locking feature that allows them to hold their position without the need for continuous power or external braking mechanisms. This self-locking capability helps maintain stability and prevents the load from shifting even in the absence of power or during power loss.
  • Anti-Backlash Mechanism: To handle challenges related to backlash or unwanted movement caused by load imbalance or vibration, some screw jacks are equipped with anti-backlash mechanisms. These mechanisms minimize or eliminate the clearance between the screw and the nut, reducing the potential for backlash and ensuring precise positioning and stability.
  • Flexible Mounting Options: Screw jacks offer flexible mounting options, which allow for proper alignment and compensation on uneven surfaces. Mounting brackets or couplings can be used to adapt the screw jacks to different orientations or to compensate for variations in the mounting surface. This flexibility ensures that the screw jacks can be securely installed and adjusted to accommodate uneven surfaces.
  • Guidance Systems: In some cases, screw jacks may incorporate guidance systems to improve stability and alignment. These guidance systems can include linear guides or rails that guide the movement of the screw, ensuring smooth and accurate operation even when dealing with load imbalance or uneven surfaces.

By employing these mechanisms and features, screw jacks can effectively handle challenges related to load imbalance or uneven surfaces. They provide stability, precise positioning, and the ability to distribute loads evenly, making them suitable for a wide range of applications even in demanding environments.

screw jack

Can screw jacks be customized or integrated into larger systems for specific uses?

Yes, screw jacks can be customized or integrated into larger systems to meet specific requirements and applications. Their modular nature and versatility allow for various customization and integration possibilities. Here are some ways screw jacks can be customized or integrated into larger systems:

  • Load Capacity Customization: Screw jacks can be customized to handle specific load capacities. Manufacturers can design and manufacture screw jacks with different load ratings to accommodate the requirements of a particular application. By customizing the load capacity, screw jacks can be optimized for lifting and supporting a wide range of loads, from light loads in precision applications to heavy machinery in industrial settings.
  • Mounting and Connection Options: Screw jacks can be customized to have different mounting and connection options. This allows for seamless integration into existing systems or specific applications. Manufacturers can provide various mounting configurations, such as flange mounts, base mounts, trunnion mounts, or clevis ends, to ensure easy installation and compatibility with the surrounding equipment or structures.
  • Stroke Length Customization: The stroke length of a screw jack can be customized to suit specific requirements. The stroke length refers to the distance the lifting screw travels during the jack’s operation. By customizing the stroke length, screw jacks can be tailored to the required vertical movement or extension needed in a particular application. This customization ensures optimal performance and efficiency in lifting or positioning tasks.
  • Specialized Materials and Coatings: Screw jacks can be customized with specialized materials or coatings to enhance their performance in specific environments. For example, in corrosive or harsh conditions, screw jacks can be manufactured using corrosion-resistant materials such as stainless steel or coated with protective finishes. This customization ensures the longevity and reliability of screw jacks in demanding applications.
  • Integration with Motorized Systems: Screw jacks can be integrated with motorized systems to automate the lifting and positioning processes. By adding electric or hydraulic motorization, screw jacks can be controlled and synchronized with other components or systems, providing precise and automated operations. This integration enables efficient and programmable movements, reducing manual labor and increasing productivity.
  • Control and Monitoring Integration: Screw jacks can be integrated with control and monitoring systems for enhanced functionality and safety. By incorporating sensors, limit switches, or feedback mechanisms, screw jacks can provide real-time feedback on position, load, or other parameters. This integration allows for accurate control, monitoring, and protection of the screw jack and the larger system it is a part of.

The customization and integration options for screw jacks make them highly adaptable to specific uses and applications. Manufacturers often work closely with customers to understand their requirements and provide tailored solutions that optimize the performance, efficiency, and reliability of screw jacks within larger systems.

screw jack

How do manufacturers ensure the quality and reliability of screw jack mechanisms?

Manufacturers employ various quality control and testing measures to ensure the quality and reliability of screw jack mechanisms. These measures are implemented throughout the manufacturing process to verify that the screw jack meets the required standards and performance specifications. Here are some common practices manufacturers use to ensure quality and reliability:

  • Design and Engineering: Manufacturers invest in robust design and engineering processes to develop screw jack mechanisms that meet the intended specifications. This includes selecting appropriate materials, determining the optimal thread design, and performing structural analysis to ensure the screw jack can handle the expected loads and movements. Thorough design and engineering processes contribute to the overall quality and reliability of the mechanism.
  • Material Selection: Manufacturers carefully select materials with the necessary strength, durability, and corrosion resistance for the construction of screw jack mechanisms. High-quality materials, such as alloy steels or stainless steels, are often chosen to ensure the longevity and reliability of the screw jack. Material selection is based on factors such as load requirements, environmental conditions, and industry standards.
  • Quality Assurance: Manufacturers implement comprehensive quality assurance processes to monitor and control the manufacturing steps. These processes include inspections, audits, and documentation to ensure that each screw jack meets the specified quality standards. Quality assurance measures may involve checks for dimensional accuracy, thread quality, surface finish, and proper assembly. Through quality assurance, manufacturers can identify and address any potential defects or deviations from the desired specifications.
  • Testing and Performance Evaluation: Manufacturers conduct rigorous testing and performance evaluations to verify the functionality, load capacity, and reliability of screw jack mechanisms. This may involve load testing, endurance testing, and cycling tests to simulate real-world operating conditions. Testing helps validate the performance of the screw jack and ensures that it can handle the intended loads and movements without failure or significant degradation over time.
  • Compliance with Standards: Manufacturers ensure that screw jack mechanisms comply with relevant industry standards and regulations. Compliance with standards such as ISO (International Organization for Standardization) or specific industry standards provides assurance of the quality and reliability of the product. Manufacturers may obtain certifications or undergo third-party audits to validate compliance with these standards.
  • Customer Feedback and Continuous Improvement: Manufacturers value customer feedback and use it to drive continuous improvement in the design, manufacturing, and performance of screw jack mechanisms. By actively seeking input from customers and end-users, manufacturers can identify areas for enhancement and implement changes to improve the quality and reliability of their products.

By implementing stringent design processes, careful material selection, thorough quality assurance, testing and performance evaluation, compliance with standards, and continuous improvement practices, manufacturers ensure the quality and reliability of screw jack mechanisms. These measures help deliver screw jacks that meet the industry’s expectations for performance, safety, and durability.

China Hot selling Good-Quality High-Frequency Rail Shaft for Needle Bearing   dimple shaft for set screwChina Hot selling Good-Quality High-Frequency Rail Shaft for Needle Bearing   dimple shaft for set screw
editor by CX 2024-04-13

China Good quality Factory Direct Supply High Frequency Induction Hardening Machine for Quenching The Shaft Metals threaded bearing shaft

Product Description

Factory direct supply High frequency induction hardening machine for quenching the shaft metals:

Advantage:
1 More than 21 years experience, high quality, stable performance
2 ISO, CE, SGS certificated
3 PLC OR CNC quenching machine line, automatic program, save workers, imporve work efficient.

Features:
1. The lifting by the Servo motor, position control by the digital input, precision of 0.1mm, wider rang of speed adjustment. The screw lift used in precision ball screw, leading column used in circular column structure, All pillar are thermal refining 45#. Hard chromium plated, No-rust, No-distortion, to ensure durable of machine.
2. Limit lift of machine position by the inductive proximity switches control. Machine with safe buffering.
3. By the mechanical type, abandoned the heavy, large hydraulic systems, To avoid leakage of hydraulic components and reduced accuracy caused by changes brought about by the oil temperature rate of change of equipment operation.
At the same time, reduce the equipment of use for requirements, Machine are use more simple smaller, operation and maintenance more convenience, rarely needs servicing.
4. Use motor control lift on the top. Can according the length of work piece to adjustment. Can be used clomping table, to ensure normal rotation of work piece.
5. The rotating speed can be adjusted digital on control panel. To meet the needs of high-precision adjustment. According to the size of work piece and requirement of quenching process. Can realiachieve the best quenching effect and quality of the work piece.
6. According to operator who can be used to adjust the position of cabinet. So that will be easy handle and work with great efficiency.
7. Work piece rotation by the S, wider rang of speed adjustment, clear and easy; Drive motor is located above the quench, to prevent the motor damp.
8. Quenched by cooling spray, at below of machine have 300mm high water tank. Without need another water tank. Reduce the installation work.
9. Easy disassembly and convenient maintenance. The main components of electronic products used in ZheJiang , long life, low maintenance cost. System uses the full English menu, intuitive interface, easy operation. The CNC/PLC panel can direct input and control quenching time, vertical speed, rotation speed etc. Can store a variety of procedures, easy to calls, especially for multi-stage, variable speed requirements and complex process etc

Model ORD-1500MM 
Work postion 1
The larggest length of the clamping workpiece 1550mm
The max quenching length 1500mm
the max turning diameter 600mm
workpiece rotation speed 20~180r/min
Quenching feeding speed 6~3000mm/min
Workpiece down  fast speed 400mm/min
the max bear weight 500KG
positioning accuracy of the quenching machine line PLC /CNC Control
quenching machine line operation way Movement Quenching/Soak Quenching
quenching speed adjustable stepless adjustable
workpiece rotational speed adjustable stepless adjustable
Water cooling sytem spray water or spray liquid

Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements. 
2. Inquiry and consulting support. 
3. Sample testing support. 
4. View our Factory.

In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.

After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
 technician to provide visiting service after checking with the customer and charge for a favorable price. 
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Within 24 Hours Response. Lifetime Service
Warranty: 1 Year
Type: Induction Heating Machine
Certification: CE
Structure: Vertical Type
Brand: Ord
Customization:
Available

|

Customized Request

screw jack

Can screw jacks be adapted for use in both indoor and outdoor environments?

Yes, screw jacks can be adapted for use in both indoor and outdoor environments. They are versatile mechanical devices that can be designed and manufactured to withstand various environmental conditions. Here’s how screw jacks can be adapted for both indoor and outdoor use:

  • Enclosure and Sealing: When screw jacks are intended for outdoor use, they can be equipped with enclosures and sealing mechanisms to protect the internal components from environmental factors such as moisture, dust, or debris. These enclosures are typically made from durable materials like stainless steel or corrosion-resistant coatings to ensure long-term protection.
  • Corrosion Resistance: Outdoor environments often expose equipment to corrosive elements. To address this, screw jacks can be manufactured with corrosion-resistant materials or coatings. Stainless steel or zinc plating are commonly used to enhance the corrosion resistance of screw jacks, making them suitable for outdoor applications where exposure to moisture, humidity, or chemicals is expected.
  • Weatherproofing: Screw jacks can be designed with weatherproofing features to resist environmental conditions such as rain, snow, or extreme temperatures. This may include seals, gaskets, or protective covers that prevent water or debris from entering the internal components, ensuring reliable operation in outdoor environments.
  • UV Resistance: Outdoor applications often expose equipment to ultraviolet (UV) radiation from sunlight. Screw jacks can be manufactured using materials that are UV-resistant or incorporate UV-protective coatings. This helps prevent degradation or discoloration of the components due to prolonged exposure to sunlight.
  • Temperature Considerations: Screw jacks can be designed to operate within a wide temperature range to accommodate diverse outdoor environments. Specialized lubricants and materials with high-temperature stability can be used to ensure proper functioning and prevent damage or degradation in extreme temperature conditions.
  • IP Ratings: In certain applications, screw jacks may require specific Ingress Protection (IP) ratings to ensure their suitability for outdoor use. IP ratings indicate the level of protection against solids and liquids. Screw jacks can be manufactured with specific IP ratings to meet the environmental requirements of different outdoor applications.

By incorporating these adaptations, screw jacks can be effectively used in both indoor and outdoor environments. Whether it’s in manufacturing facilities, construction sites, or outdoor maintenance tasks, screw jacks provide reliable performance and can withstand the challenges posed by various environmental conditions.

screw jack

How do screw jacks ensure smooth and controlled linear movement of loads?

Screw jacks are designed to ensure smooth and controlled linear movement of loads. They employ several mechanisms and features that contribute to this capability. Here are some ways in which screw jacks achieve smooth and controlled linear movement:

  • Threaded Screw and Nut Mechanism: Screw jacks consist of a threaded screw and a matching nut. The screw is rotated using a handle or a motor, causing it to move linearly through the nut. The thread geometry allows for smooth and controlled movement as the screw advances or retracts. The precision of the screw thread ensures that the load moves linearly without jerks or sudden changes in speed.
  • Low Friction and High Efficiency: Screw jacks are designed to minimize friction and maximize efficiency. The components of the screw jack, such as the screw, nut, and bearing surfaces, are manufactured with smooth and precise finishes. This reduces frictional forces and minimizes energy losses during operation. The low friction characteristics enable smooth movement and ensure that a significant portion of the input force is translated into lifting or lowering the load.
  • Load Distribution and Stability: Screw jacks are designed to distribute the load evenly across the screw thread and nut. This ensures that the load is supported and guided in a stable manner during linear movement. The load-bearing components of the screw jack, such as the housing and base, are constructed to provide adequate strength and rigidity, minimizing deflection and maintaining stability throughout the lifting or lowering process.
  • Anti-Backlash Mechanisms: Backlash refers to the slight axial movement or play that can occur between the screw and the nut in a screw jack. To minimize backlash and ensure precise control, screw jacks often incorporate anti-backlash mechanisms. These mechanisms, such as preloading springs or adjustable backlash nuts, reduce or eliminate any free movement, allowing for more accurate and controlled linear motion of the load.
  • Overload Protection: Screw jacks may include overload protection features to prevent damage or failure in the event of excessive loads or unexpected conditions. These features can include mechanical stops, shear pins, or overload clutches that disengage or limit the load-carrying capacity of the screw jack when predetermined limits are exceeded. Overload protection mechanisms contribute to the safe and controlled movement of loads.

By employing a threaded screw and nut mechanism, minimizing friction, ensuring load distribution and stability, incorporating anti-backlash mechanisms, and providing overload protection, screw jacks enable smooth and controlled linear movement of loads. These features make screw jacks suitable for a wide range of applications where precise positioning, lifting, or lowering with controlled speed and stability is required.

screw jack

How do manufacturers ensure the quality and reliability of screw jack mechanisms?

Manufacturers employ various quality control and testing measures to ensure the quality and reliability of screw jack mechanisms. These measures are implemented throughout the manufacturing process to verify that the screw jack meets the required standards and performance specifications. Here are some common practices manufacturers use to ensure quality and reliability:

  • Design and Engineering: Manufacturers invest in robust design and engineering processes to develop screw jack mechanisms that meet the intended specifications. This includes selecting appropriate materials, determining the optimal thread design, and performing structural analysis to ensure the screw jack can handle the expected loads and movements. Thorough design and engineering processes contribute to the overall quality and reliability of the mechanism.
  • Material Selection: Manufacturers carefully select materials with the necessary strength, durability, and corrosion resistance for the construction of screw jack mechanisms. High-quality materials, such as alloy steels or stainless steels, are often chosen to ensure the longevity and reliability of the screw jack. Material selection is based on factors such as load requirements, environmental conditions, and industry standards.
  • Quality Assurance: Manufacturers implement comprehensive quality assurance processes to monitor and control the manufacturing steps. These processes include inspections, audits, and documentation to ensure that each screw jack meets the specified quality standards. Quality assurance measures may involve checks for dimensional accuracy, thread quality, surface finish, and proper assembly. Through quality assurance, manufacturers can identify and address any potential defects or deviations from the desired specifications.
  • Testing and Performance Evaluation: Manufacturers conduct rigorous testing and performance evaluations to verify the functionality, load capacity, and reliability of screw jack mechanisms. This may involve load testing, endurance testing, and cycling tests to simulate real-world operating conditions. Testing helps validate the performance of the screw jack and ensures that it can handle the intended loads and movements without failure or significant degradation over time.
  • Compliance with Standards: Manufacturers ensure that screw jack mechanisms comply with relevant industry standards and regulations. Compliance with standards such as ISO (International Organization for Standardization) or specific industry standards provides assurance of the quality and reliability of the product. Manufacturers may obtain certifications or undergo third-party audits to validate compliance with these standards.
  • Customer Feedback and Continuous Improvement: Manufacturers value customer feedback and use it to drive continuous improvement in the design, manufacturing, and performance of screw jack mechanisms. By actively seeking input from customers and end-users, manufacturers can identify areas for enhancement and implement changes to improve the quality and reliability of their products.

By implementing stringent design processes, careful material selection, thorough quality assurance, testing and performance evaluation, compliance with standards, and continuous improvement practices, manufacturers ensure the quality and reliability of screw jack mechanisms. These measures help deliver screw jacks that meet the industry’s expectations for performance, safety, and durability.

China Good quality Factory Direct Supply High Frequency Induction Hardening Machine for Quenching The Shaft Metals   threaded bearing shaftChina Good quality Factory Direct Supply High Frequency Induction Hardening Machine for Quenching The Shaft Metals   threaded bearing shaft
editor by CX 2024-04-08

China best 250kw-3.6MW Forging Main Shaft for Wind Power Generator threaded bearing shaft

Product Description

Key attributes

Other attributes

Warranty

1.5 years

 

Applicable Industries

Building Material Shops, Manufacturing Plant, Energy & Mining

 

Weight (KG)

1

 

Showroom Location

None

 

Video outgoing-inspection

Provided

 

Machinery Test Report

Provided

 

Marketing Type

New Product 2571

 

Warranty of core components

1 Year

 

Core Components

Gear

 

Material

stainless steel 304, stainless steel 316, 42CrMo, 17CrNiMo, 45steel, 40Cr

 

Place of Origin

ZheJiang , China

 

Condition

New

 

Brand Name

HangZhou 

China shaft manufacturer custom chrome steel shaft eccentric shaft

 

Product Name

Customized forging Steel large Inner tooth Gear Ring

 

Application

Industry/Gearbox/ Transmission Parts

 

Size

Customer’s Drawing

 

Processing

Hobbing/Milling/Shapping

 

Standard

DIN/GB/AISI

 

Surface treatment

Polishing/Grinding/ Painting/Anti Rust Oil

 

Heat Teatment

QT/Hardening/Carburizing

 

Blank

Forging or Casting as per drawing.

 

Quality Control

Nondestructive Testing (UT/MT/RT/PT)

 

Certificate

ISO9001

 

Packaging and delivery

Packaging Details

1.Wooden box with fumigation
2.Wooden Fram with waterproof cloth

 

Port

ZheJiang or HangZhou Port

 

attribute-list

Supply Ability

50000 Piece/Pieces per Year

 

Lead time

Quantity (pieces) 1 – 10 > 10
Lead time (days) 45 To be negotiated

 

 

 

 

Production Process

We can produce various specifications of gear, meanwhile, we can also provide gear blanks.
We have a full set of production processes and testing instruments for forging, heat treatment and machining.
We have 5 medium frequency furnaces and 5 electric slag heavy furnaces, which can produce 1 ton-18 tons of various types of alloy steel, with an annual capacity of 10,000 tons. The main characteristics of electroslag remelting are that it can flexibly produce various types of special steel in size and batch, with pure composition, uniform and dense crystal organization.
Natural gas digital display computer temperature control heating CZPT can accurately control the heating temperature of raw materials.
800T fast forging machine can quickly forge products, 3150T and 5000T oil press can forge heavy-duty axle products. They can guarantee the forging ratio required by the product, and ensure a good metallographic structure.
More than 20 digital display resistance furnaces can be used fot normalizing, quenching and tempering products, at the same time, there are induction quenching and carburization process, so as to ensure the mechanical performance requirements of the gear
We have a number of , HOFLER and other gear rolling machine, inner tooth ring milling machine, gear insertion machine, gear grinding machine and car milling CZPT center and other gear processing equipment.

TS regards Quality as the essential part of our business success. Based on your requirements, we have raw material in-coming inspection, process control and pre-shipment inspection. With advanced test equipments such as spectrometer, CMM, tensile strength tester, microscope, hardness tester, etc, TS is CZPT to apply sufficient chemical and physical inspection. According to your request, we are also capable to do X-Ray, Magnetic Testing, Ultrasonic Testing and liquid Penetrant Examination.

PRODUCT PACKAGING
OUR WORKSHOPS
COOPERATIVE BRAND

 

Product Packaging

Product PackaPRging

 

Material: Steel
Load: Drive Shaft
Appearance Shape: Steel
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

screw jack

How do screw jacks impact the overall cost-effectiveness of industrial processes?

Screw jacks have a significant impact on the overall cost-effectiveness of industrial processes. They offer several advantages that contribute to cost savings, improved efficiency, and increased productivity. Here’s how screw jacks impact the cost-effectiveness of industrial processes:

  • Precision and Accuracy: Screw jacks provide precise and accurate positioning, alignment, and movement of components. This precision reduces errors, rework, and scrap, resulting in higher product quality and lower production costs. Accurate positioning also improves the efficiency of assembly, reducing the time required for adjustments and alignments.
  • Flexibility and Adaptability: Screw jacks are versatile and can be customized to meet specific requirements. They can be easily integrated into existing systems or machinery, allowing for cost-effective modifications or upgrades. Their adaptability enables the optimization of processes, reducing the need for expensive equipment replacements.
  • Load Handling Capacity: Screw jacks have high load handling capacities, allowing them to support heavy loads. This eliminates the need for additional equipment or specialized machinery, reducing capital investment and operational costs. The ability to handle substantial loads efficiently also improves productivity and throughput.
  • Maintenance and Durability: Screw jacks are designed for durability and require minimal maintenance. Their robust construction and use of materials that withstand harsh environments contribute to their long service life. Reduced maintenance requirements result in lower maintenance costs and less downtime, leading to increased overall productivity.
  • Energy Efficiency: Screw jacks offer energy-efficient operation. They consume power only during movement or adjustment and require no power when holding a position. This energy efficiency reduces operational costs and contributes to a greener and more sustainable approach to industrial processes.
  • Safety and Operator Ergonomics: Screw jacks can improve safety and operator ergonomics in industrial processes. They allow for controlled and precise movement, reducing the risk of accidents or injuries. Moreover, screw jacks can be designed to facilitate ergonomic positioning of workpieces, reducing strain on operators and enhancing their productivity.
  • Reliability and Longevity: Screw jacks are known for their reliability and long service life. Their robust construction and use of high-quality materials ensure dependable performance even in demanding industrial environments. The reduced need for frequent replacements or repairs contributes to cost savings in the long run.

By offering precision, flexibility, efficiency, durability, and safety, screw jacks positively impact the cost-effectiveness of industrial processes. They optimize productivity, reduce operational expenses, and enhance the overall efficiency of manufacturing, assembly, and material handling processes.

screw jack

Can screw jacks be used for both light-duty and heavy-duty applications?

Yes, screw jacks are versatile mechanical devices that can be used for both light-duty and heavy-duty applications. Their design and construction allow them to handle a wide range of loads, making them suitable for various industrial, commercial, and residential tasks. Here’s how screw jacks are used in both light-duty and heavy-duty applications:

  • Light-Duty Applications: Screw jacks find application in numerous light-duty tasks where precise positioning, lifting, or adjustment is required. Examples of light-duty applications include:
  • Workbenches and assembly stations: Screw jacks can be employed to adjust the height of workbenches or assembly stations, allowing operators to work at comfortable levels.
  • Stage and theater equipment: Screw jacks are used to raise or lower stage platforms, lighting fixtures, or props, allowing for easy setup and adjustments during performances.
  • Medical and healthcare equipment: Screw jacks are utilized in medical beds, examination tables, or dental chairs to enable height adjustments for patient comfort and medical procedures.
  • Optical and laboratory equipment: Screw jacks provide precise vertical positioning in optical systems, microscopes, or laboratory setups, ensuring accurate alignment and focus.
  • Residential applications: Screw jacks can be used in home applications, such as adjustable tables, ergonomic furniture, or lifting mechanisms for storage units.
  • Heavy-Duty Applications: Screw jacks are also capable of handling heavy-duty applications that involve substantial loads and demanding conditions. Examples of heavy-duty applications include:
  • Industrial machinery: Screw jacks are utilized in various industrial machinery, including presses, injection molding machines, or material handling equipment, to provide precise control and lifting capabilities.
  • Construction and infrastructure projects: Screw jacks are employed in construction tasks, such as formwork systems, scaffolding, or temporary structures, for lifting, leveling, or supporting heavy loads.
  • Transportation and automotive: Screw jacks find application in automotive lifts, vehicle maintenance equipment, or cargo handling systems, enabling the lifting and positioning of heavy vehicles or loads.
  • Shipbuilding and offshore industries: Screw jacks are used in shipbuilding and offshore applications for tasks such as aligning sections, adjusting propeller pitch, or lifting heavy components during construction or maintenance.
  • Mining and heavy equipment: Screw jacks are utilized in mining machinery, cranes, or heavy equipment for load positioning, maintenance, or stabilization.

It’s important to note that the specific design, size, and load capacity of the screw jack should be matched to the requirements of the application. Manufacturers provide a wide range of screw jack models with varying load capacities, travel distances, and configurations to accommodate both light-duty and heavy-duty applications. Proper selection and installation of the screw jack ensure optimal performance and safety in diverse tasks.

screw jack

Which industries and sectors commonly rely on screw jacks for their operations?

Screw jacks find applications in various industries and sectors where lifting heavy loads, adjusting height, or precise positioning is required. Here are some of the industries and sectors that commonly rely on screw jacks for their operations:

  • Manufacturing: Screw jacks are extensively used in manufacturing industries for tasks such as lifting and positioning heavy equipment, adjusting assembly line heights, and aligning components during production processes.
  • Construction: The construction industry utilizes screw jacks for tasks like lifting and stabilizing structural elements during building construction, adjusting formwork and scaffolding heights, and positioning heavy machinery or materials.
  • Automotive: In the automotive sector, screw jacks are employed for lifting vehicles during maintenance and repairs, adjusting conveyor heights in assembly lines, and positioning components during manufacturing processes.
  • Transportation and Logistics: Screw jacks are used in transportation and logistics for tasks such as adjusting loading dock heights, raising or lowering platforms on trucks or trailers, and positioning cargo handling equipment.
  • Entertainment and Events: The entertainment and events industry relies on screw jacks for stage setups, lifting and adjusting lighting equipment, raising or lowering platforms for performers, and creating dynamic stage effects.
  • Aerospace and Defense: Screw jacks are utilized in the aerospace and defense sectors for applications such as adjusting heights of launch platforms, positioning aircraft components during assembly, and operating heavy-duty doors or hatches.
  • Material Handling and Warehousing: Screw jacks are found in material handling and warehousing operations for tasks like adjusting conveyor heights, lifting heavy pallets or containers, and positioning racks or shelves.
  • Mining and Heavy Machinery: The mining industry and sectors involving heavy machinery utilize screw jacks for lifting and positioning equipment, adjusting conveyor heights, and supporting heavy loads in various mining operations.
  • Energy and Utilities: Screw jacks are employed in energy and utility sectors for tasks such as adjusting heights of solar panels or wind turbines, raising or lowering equipment in power plants, and positioning components in utility infrastructure.
  • Medical and Rehabilitation: In the medical and rehabilitation fields, screw jacks are used for height adjustment of medical beds, positioning of imaging equipment, and providing adjustable support systems for patients.

This list is not exhaustive, and screw jacks may find applications in other industries and sectors beyond those mentioned. The versatility, load capacity, and precise control offered by screw jacks make them valuable tools in a wide range of operations requiring lifting, adjusting, or positioning heavy loads.

China best 250kw-3.6MW Forging Main Shaft for Wind Power Generator   threaded bearing shaftChina best 250kw-3.6MW Forging Main Shaft for Wind Power Generator   threaded bearing shaft
editor by CX 2023-11-21

China high quality High Quality Twin Screw Element Shaft for Plastic Extruder Tex90 screw shaft bearing

Product Description

High Quality Twin Screw Element Shaft for Plastic Extruder  TEX90

Production description:

Production name: Screw element Model Number: TEX90
Extrusion equipment:    Material: WR12
Place of Origin China Application Twin screw extruder machine
Production ability 300m / Per month Diameter 90mm

Co-rotating twin screw elements for 
-APV        -KOBE           -OMC
-Buhler     -Theysohn
-Buss        -Toshiba
-Clextral     -Labtech          -USEON
-Lantai          – others
-JSW        -Leistritz    
-Keya        -Maris

Types of the Screw Segments
 Convey Screw Segment
 Mixing Screw Segment
 Kneading Block & Disk
 Transition Screw Element
 Deep groove transfer element
 Screw element for side feeder
 1-flighted,2-flighted,3-flighted screw elements

We offer a broader choice of materials:
For wear application:
 Tool Steel : W6Mo5Cr4V2;
 PM-HIP material : SAM10,SAM26,SAM39,CPM10V,CPM9V
For corrision application:
 Nitrided Steel: 38CrMoAI;
 PM-HIP material : SAM26,SAM39,CPM10V,CPM9V
For wear and corrision application:
 PM-HIP material:SAM26,SAM39,CPM10V,CPM9V
Other materials:
Stainless Steel: 316L,C276 etc.
By working closely with customers in choosing optional materials,we can minimize wear and tear and associated costs.

Our Production Plant

FRQ
 
1. Q: Are you a factory or trading company? 
 —-A: A factory 
2. Q: Where is your factory located? How can I visit there? 
—–A: Our factory is located in HangZhou, ZheJiang  Province, China, 
1) You can fly to HangZhou Airport directly. We will pick you up when you arrive in the airport; 
All our clients, from domestic or abroad, are warmly welcome to visit us! 
                                             
3.Q: What makes you different with others?
—-A: 1) Our Excellent Service 
 For a quick, no hassle quote just send email to us
 We promise to reply with a price within 24 hours – sometimes even within the hour.
 
2) Our quick manufacturing time
For Normal orders, we will promise to produce within 30 working days.
As a manufacturer, we can ensure the delivery time according to the formal contract.
 
 4.Q: How about the delivery time? 
—-A: This depends on the product. Typically standard products are delivered within 30 days. 
 

  1.  Q: What is the term of payment? 
    —-A: 1) T/T payment;   2) LC;  

 
6.Q: May I know the status of my order?
—-A: Yes .We will send you information and photos at different production stage of your order. You will get the latest information in time. 

After-sales Service: 1 Months
Warranty: 6 Months
Standard: DIN
Technics: Casting
Feature: Recycle
Material: Metal
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

screw jack

What role do screw jacks play in the precision of assembly line operations?

Screw jacks play a crucial role in ensuring the precision of assembly line operations. They are widely used in manufacturing and assembly processes where accurate positioning, alignment, and control are essential. Here’s how screw jacks contribute to the precision of assembly line operations:

  • Precise Positioning: Screw jacks provide precise and controlled linear motion, allowing for accurate positioning of components, parts, or tools on the assembly line. The screw mechanism of the screw jack enables fine adjustments with high positional accuracy, ensuring that each component is correctly placed and aligned according to the required specifications.
  • Height Adjustment: Screw jacks are commonly used for height adjustment applications in assembly lines. They allow for easy and precise vertical movement, enabling operators to align workstations, fixtures, or equipment at the optimal height for efficient assembly operations. The ability to fine-tune the height with screw jacks ensures ergonomic working conditions and promotes worker comfort and productivity.
  • Load Handling: Screw jacks have the capability to handle a wide range of loads, from light to heavy. This makes them suitable for assembly line operations that involve different types of components or equipment with varying weights. By providing reliable load support and stability, screw jacks contribute to the precision of assembly line operations by ensuring that the load is properly supported and aligned during the assembly process.
  • Force Control: Screw jacks offer precise force control capabilities, allowing operators to apply consistent and controlled forces during assembly operations. This is particularly important for tasks that require delicate handling or specific force requirements, such as tightening bolts, fastening components, or applying pressure for proper fitment. The force control provided by screw jacks helps maintain the required precision and avoids overloading or damaging the assembly components.
  • Synchronization: In assembly line operations that involve multiple workstations or moving parts, screw jacks can be synchronized to ensure coordinated movement. By mechanically or electrically linking the screw jacks together, they canscrew jack

    What are the common signs of wear or issues that might require screw jack maintenance?

    Regular maintenance is important for ensuring the proper functioning and longevity of screw jacks. It helps identify and address potential issues before they escalate into more significant problems. Here are some common signs of wear or issues that might indicate the need for screw jack maintenance:

    • Unusual Noise: If a screw jack starts producing unusual noises during operation, such as grinding, squeaking, or knocking sounds, it could indicate a problem. These noises may be a result of worn or damaged components, inadequate lubrication, misalignment, or other mechanical issues. Prompt maintenance is necessary to diagnose and resolve the source of the noise.
    • Increased Friction: If the movement of the screw jack becomes more difficult or requires excessive force, it could indicate increased friction within the mechanism. This may be caused by insufficient lubrication, contaminated lubricant, or worn components. Addressing the friction issue through maintenance, including lubrication and inspection of components, is important to prevent further damage and ensure smooth operation.
    • Excessive Play or Backlash: Excessive play or backlash refers to unwanted movement or looseness in the screw jack assembly. It can occur due to worn or damaged components, improper assembly, or misalignment. Excessive play can negatively impact the precision, stability, and load-bearing capacity of the screw jack. Maintenance should be conducted to identify the cause of the play and rectify it to restore proper functionality.
    • Irregular Movement: If the screw jack exhibits irregular or jerky movement instead of smooth and consistent operation, it may indicate issues with the drive mechanism, misalignment, or worn parts. Irregular movement can affect the performance and accuracy of the screw jack, potentially leading to safety hazards or reduced efficiency. Maintenance is necessary to diagnose and address the underlying causes of irregular movement.
    • Leakage or Seal Damage: Screw jacks equipped with hydraulic or lubricant-filled systems may experience leakage or seal damage over time. Leakage can result in a loss of lubrication or hydraulic fluid, leading to inadequate lubrication, reduced performance, or system failure. Regular inspection and maintenance of seals, gaskets, and fluid levels are necessary to identify and rectify any leaks or seal damage.
    • Visible Wear or Damage: Physical inspection of the screw jack is essential to identify visible signs of wear or damage. This may include worn threads, cracked or damaged housing, bent or misaligned components, or signs of corrosion. Any visible wear or damage should be addressed through maintenance to prevent further deterioration and ensure safe and reliable operation.

    Regular inspection and maintenance are crucial to detect and address these signs of wear or issues promptly. It is recommended to follow the manufacturer’s guidelines for maintenance intervals and procedures to ensure the optimal performance and longevity of screw jacks.

    screw jack

    How do screw jacks convert rotary motion into linear motion?

    Screw jacks convert rotary motion into linear motion through the interaction between a threaded shaft, known as the screw, and a nut that engages with the screw’s threads. When the screw is rotated, it moves the nut along its threads, resulting in linear displacement. Here are the key steps that explain how screw jacks convert rotary motion into linear motion:

    • Threaded Shaft: The screw in a screw jack is a threaded shaft with helical grooves running along its length. The threads can be either square or trapezoidal in shape. The pitch of the screw refers to the distance traveled along the screw’s axis for each complete revolution.
    • Nut Engagement: The nut is a component that engages with the screw’s threads. It is typically a cylindrical or rectangular block with a threaded hole that matches the screw’s threads. The nut is free to move linearly along the screw’s length when the screw is rotated.
    • Rotary Motion: To convert rotary motion into linear motion, an external force is applied to rotate the screw. This force can be generated manually by turning a handle, using an electric motor, or employing hydraulic or pneumatic systems.
    • Linear Displacement: As the screw is rotated, the nut moves along the screw’s threads, causing linear displacement. The direction and magnitude of the displacement depend on the rotational direction and the pitch of the screw. Clockwise rotation typically results in upward linear displacement, while counterclockwise rotation leads to downward displacement.
    • Mechanical Advantage: Screw jacks provide a mechanical advantage due to the pitch of the screw. The pitch determines the distance traveled per revolution. By increasing the pitch or using multiple-start threads, the linear displacement achieved per rotation can be increased, allowing for the lifting or lowering of heavier loads with relatively less rotational effort.
    • Self-Locking: One important characteristic of screw jacks is their self-locking ability. The friction between the screw and the nut helps to maintain the position of the load once the rotational force is removed. This means that screw jacks can hold loads in position without requiring continuous power or external braking mechanisms.

    In summary, screw jacks convert rotary motion into linear motion by rotating a threaded screw, which in turn moves a nut linearly along the screw’s threads. The pitch of the screw determines the linear displacement achieved per revolution, and the self-locking nature of the screw and nut interface helps maintain the position of the load without the need for additional mechanisms.

    China high quality High Quality Twin Screw Element Shaft for Plastic Extruder Tex90   screw shaft bearingChina high quality High Quality Twin Screw Element Shaft for Plastic Extruder Tex90   screw shaft bearing
    editor by CX 2023-11-17

China Professional 280 Shafts for Twin Screw Extruder for Petrochemical Factory set screw bearing shaft tolerance

Product Description

 280 shaft for twin screw extruder

 We manufacture screw shafts for co-rotating twin screw extruders ranging from 10 mm to 14000 mm and over. Our manufacturing specializes in shafts for twin screw extruders and is optimized for flexible order handling.

Co-rotating twin screw shafts for 
-APV        -KOBE           -OMC
-Buhler      -KraussMaffei      -Theysohn
-Buss       -Berstorff-          -Toshiba
-Clextral     -Labtech          -USEON
     -Lantai          – others
-JSW        -Leistritz    
-Keya        -Maris

Types of  shaft
* Single Keyway                  * Square Keyslot          *High torque key button       * Dual keyslot
* Involute inner spline         * Round keyslot           *Retackle spline              * Client’s requirements available

We offer a broader choice of materials:

Germany materials:WR15E
Japan materials:WR15A
Chian materials:WR12  40CrNiMo    
By working closely with customers in choosing optional materials,we can minimize wear and tear and associated costs.

Our Production Plant

FRQ
 
1. Q: Are you a factory or trading company? 
 —-A: A factory 
2. Q: Where is your factory located? How can I visit there? 
—–A: Our factory is located in HangZhou, ZheJiang  Province, China, 
1) You can fly to HangZhou Airport directly. We will pick you up when you arrive in the airport; 
All our clients, from domestic or abroad, are warmly welcome to visit us! 
                                             
3.Q: What makes you different with others?
—-A: 1) Our Excellent Service 
 For a quick, no hassle quote just send email to us
 We promise to reply with a price within 24 hours – sometimes even within the hour.
 
2) Our quick manufacturing time
For Normal orders, we will promise to produce within 30 working days.
As a manufacturer, we can ensure the delivery time according to the formal contract.
 
 4.Q: How about the delivery time? 
—-A: This depends on the product. Typically standard products are delivered within 30 days. 
 

  1.  Q: What is the term of payment? 
    —-A: 1) T/T payment;   2) LC;  

 
6.Q: May I know the status of my order?
—-A: Yes .We will send you information and photos at different production stage of your order. You will get the latest information in time. 
 

After-sales Service: 1 Year
Warranty: 1 Year
Standard: ISO9001
Technics: Forging
Feature: Recycle
Material: Stainless Steel
Customization:
Available

|

Customized Request

screwshaft

Types of Screw Shafts

Screw shafts come in various types and sizes. These types include fully threaded, Lead, and Acme screws. Let’s explore these types in more detail. What type of screw shaft do you need? Which one is the best choice for your project? Here are some tips to choose the right screw:

Machined screw shaft

The screw shaft is a basic piece of machinery, but it can be further customized depending on the needs of the customer. Its features include high-precision threads and ridges. Machined screw shafts are generally manufactured using high-precision CNC machines or lathes. The types of screw shafts available vary in shape, size, and material. Different materials are suitable for different applications. This article will provide you with some examples of different types of screw shafts.
Ball screws are used for a variety of applications, including mounting machines, liquid crystal devices, measuring devices, and food and medical equipment. Various shapes are available, including miniature ball screws and nut brackets. They are also available without keyway. These components form a high-accuracy feed mechanism. Machined screw shafts are also available with various types of threaded ends for ease of assembly. The screw shaft is an integral part of linear motion systems.
When you need a machined screw shaft, you need to know the size of the threads. For smaller machine screws, you will need a mating part. For smaller screw sizes, the numbers will be denominated as industry Numeric Sizes. These denominations are not metric, but rather in mm, and they may not have a threads-per-inch designation. Similarly, larger machine screws will usually have threads that have a higher pitch than those with a lower pitch.
Another important feature of machine screws is that they have a thread on the entire shaft, unlike their normal counterparts. These machine screws have finer threads and are intended to be screwed into existing tapped holes using a nut. This means that these screws are generally stronger than other fasteners. They are usually used to hold together electronic components, industrial equipment, and engines. In addition to this, machine screws are usually made of a variety of materials.

Acme screw

An Acme screw is the most common type of threaded shaft available. It is available in a variety of materials including stainless steel and carbon steel. In many applications, it is used for large plates in crushing processes. ACME screws are self-locking and are ideal for applications requiring high clamping force and low friction. They also feature a variety of standard thread forms, including knurling and rolled worms.
Acme screws are available in a wide range of sizes, from 1/8″ to 6″. The diameter is measured from the outside of the screw to the bottom of the thread. The pitch is equal to the lead in a single start screw. The lead is equal to the pitch plus the number of starts. A screw of either type has a standard pitch and a lead. Acme screws are manufactured to be accurate and durable. They are also widely available in a wide range of materials and can be customized to fit your needs.
Another type of Acme screw is the ball screw. These have no back drive and are widely used in many applications. Aside from being lightweight, they are also able to move at faster speeds. A ball screw is similar to an Acme screw, but has a different shape. A ball screw is usually longer than an Acme screw. The ball screw is used for applications that require high linear speeds. An Acme screw is a common choice for many industries.
There are many factors that affect the speed and resolution of linear motion systems. For example, the nut position and the distance the screw travels can all affect the resolution. The total length of travel, the speed, and the duty cycle are all important. The lead size will affect the maximum linear speed and force output. If the screw is long, the greater the lead size, the higher the resolution. If the lead length is short, this may not be the most efficient option.
screwshaft

Lead screw

A lead screw is a threaded mechanical device. A lead screw consists of a cylindrical shaft, which includes a shallow thread portion and a tightly wound spring wire. This spring wire forms smooth, hard-spaced thread convolutions and provides wear-resistant engagement with the nut member. The wire’s leading and trailing ends are anchored to the shaft by means appropriate to the shaft’s composition. The screw is preferably made of stainless steel.
When selecting a lead screw, one should first determine its critical speed. The critical speed is the maximum rotations per minute based on the natural frequency of the screw. Excessive backlash will damage the lead screw. The maximum number of revolutions per minute depends on the screw’s minor diameter, length, assembly alignment, and end fixity. Ideally, the critical speed is 80% of its evaluated critical speed. A critical speed is not exceeded because excessive backlash would damage the lead screw and may be detrimental to the screw’s performance.
The PV curve defines the safe operating limits of a lead screw. This relationship describes the inverse relationship between contact surface pressure and sliding velocity. As the PV value increases, a lower rotation speed is required for heavier axial loads. Moreover, PV is affected by material and lubrication conditions. Besides, end fixity, which refers to the way the lead screw is supported, also affects its critical speed. Fixed-fixed and free end fixity are both possible.
Lead screws are widely used in industries and everyday appliances. In fact, they are used in robotics, lifting equipment, and industrial machinery. High-precision lead screws are widely used in the fields of engraving, fluid handling, data storage, and rapid prototyping. Moreover, they are also used in 3D printing and rapid prototyping. Lastly, lead screws are used in a wide range of applications, from measuring to assembly.

Fully threaded screw

A fully threaded screw shaft can be found in many applications. Threading is an important feature of screw systems and components. Screws with threaded shafts are often used to fix pieces of machinery together. Having fully threaded screw shafts ensures that screws can be installed without removing the nut or shaft. There are two major types of screw threads: coarse and fine. When it comes to coarse threads, UTS is the most common type, followed by BSP.
In the 1840s, a British engineer named Joseph Whitworth created a design that was widely used for screw threads. This design later became the British Standard Whitworth. This standard was used for screw threads in the United States during the 1840s and 1860s. But as screw threads evolved and international standards were established, this system remained largely unaltered. A new design proposed in 1864 by William Sellers improved upon Whitworth’s screw threads and simplified the pitch and surface finish.
Another reason for using fully threaded screws is their ability to reduce heat. When screw shafts are partially threaded, the bone grows up to the screw shaft and causes the cavity to be too narrow to remove it. Consequently, the screw is not capable of backing out. Therefore, fully threaded screws are the preferred choice for inter-fragmentary compression in children’s fractures. However, surgeons should know the potential complication when removing metalwork.
The full thread depth of a fully threaded screw is the distance at which a male thread can freely thread into the shaft. This dimension is typically one millimeter shy of the total depth of the drilled hole. This provides space for tap lead and chips. The full-thread depth also makes fully threaded screws ideal for axially-loaded connections. It is also suitable for retrofitting applications. For example, fully threaded screws are commonly used to connect two elements.
screwshaft

Ball screw

The basic static load rating of a ball screw is determined by the product of the maximum axial static load and the safety factor “s0”. This factor is determined by past experience in similar applications and should be selected according to the design requirements of the application. The basic static load rating is a good guideline for selecting a ball screw. There are several advantages to using a ball screw for a particular application. The following are some of the most common factors to consider when selecting a ball screw.
The critical speed limit of a ball screw is dependent on several factors. First of all, the critical speed depends on the mass, length and diameter of the shaft. Second, the deflection of the shaft and the type of end bearings determine the critical speed. Finally, the unsupported length is determined by the distance between the ball nut and end screw, which is also the distance between bearings. Generally, a ball screw with a diameter greater than 1.2 mm has a critical speed limit of 200 rpm.
The first step in manufacturing a high-quality ball screw is the choice of the right steel. While the steel used for manufacturing a ball screw has many advantages, its inherent quality is often compromised by microscopic inclusions. These microscopic inclusions may eventually lead to crack propagation, surface fatigue, and other problems. Fortunately, the technology used in steel production has advanced, making it possible to reduce the inclusion size to a minimum. However, higher-quality steels can be expensive. The best material for a ball screw is vacuum-degassed pure alloy steel.
The lead of a ball screw shaft is also an important factor to consider. The lead is the linear distance between the ball and the screw shaft. The lead can increase the amount of space between the balls and the screws. In turn, the lead increases the speed of a screw. If the lead of a ball screw is increased, it may increase its accuracy. If not, the lead of a ball screw can be improved through preloading, lubrication, and better mounting accuracy.

China Professional 280 Shafts for Twin Screw Extruder for Petrochemical Factory   set screw bearing shaft toleranceChina Professional 280 Shafts for Twin Screw Extruder for Petrochemical Factory   set screw bearing shaft tolerance
editor by CX 2023-10-27

in Varanasi India sales price shop near me near me shop factory supplier 51107 Chrom Steel Thrust Ball Bearing for Machine Spindle manufacturer best Cost Custom Cheap wholesaler

  in Varanasi India  sales   price   shop   near me   near me shop   factory   supplier 51107 Chrom Steel Thrust Ball Bearing for Machine Spindle manufacturer   best   Cost   Custom   Cheap   wholesaler

“We are usually serving our clients with our best goods.” We also can design and make non-standard items to fulfill customers’ unique requirements. Our merchandise assortment contains all kinds of helical equipment, spur gear, bevel equipment, gear rack, worm gear, sprockets,chains, bearings.

51107 chrom steel thrust ball bearing for EPTT spindle

Item Description
Thrust ball bearing is a separate bearing, the speak to ball is 90 deg, this variety of bearing is composed of inner ring, outer ring and retainer. Single-row thrust ball bearing can carry aXiHu (West EPT) Dis.al load from one path.

Two-row thrust ball bearing can have aXiHu (West EPT) Dis.al load from double path. Thrust ball bearing with spherical rings has aligning efficiency, which can eliminate set up error.

Thrust ball bearings are made as single direction or double route thrust ball bearings. They are developed to accommodate aXiHu (West EPT) Dis.al loads only and must not be subjected to any radial load.

Thrust ball bearings are separable, i.e. the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted individually. Shaft washers have a ground bore to enable an interference match. The bore of the housing washer is turned and alwaEPTTlarger than the shaft washer bore.

Feartures:
ANR thrust ball bearings are layout to accommodate large aXiHu (West EPT) Dis.al load, nonetheless they have to not be subjected to radial load. Most regular bearings are solitary direction thrust ball bearings. In the course of operation these bearings need to be continuously subjected to a specific aXiHu (West EPT) Dis.al load. These bearings can be also mixed with spherical rings to cope with little preliminary misalignments.

thrust ball bearing

ISO Dimensions (mm) Standard Load Rating (N) Limitting pace ( r/min ) Excess weight
Lubrication
d D B Dyn. C Stat. C0 Grease Oil
51100 ten 24 9 ten thousand 14000 7000 9500 .02
51101 12 26 nine 10400 15300 6700 9000 .571
51102 15 28 9 10600 16600 6300 8500 .571
51103 seventeen thirty 9 11400 19600 6300 8500 .571
51104 20 35 10 12700 20800 5600 7500 .038
51105 25 42 eleven 15900 29000 4800 6300 .056
51106 30 forty seven 11 16800 33500 4500 6000 .063
51107 35 52 twelve 17400 37500 4300 5600 .08
51108 40 60 thirteen 23400 50000 3800 5000 .twelve
51109 45 sixty five 14 24200 57000 3400 4500 .14
51110 fifty 70 fourteen 25500 63000 3200 4300 .sixteen
51111 fifty five 78 16 30700 78000 2800 3800 .247
51112 60 eighty five 17 36400 93000 2600 3600 .33
51113 sixty five ninety eighteen 37100 98000 2400 3400 .359
51114 70 ninety five 18 37700 104000 2400 3400 .385
51115 seventy five one hundred 19 44200 137000 2200 3200 .4
51116 80 105 19 44900 140000 2000 3000 .forty two
51117 85 110 19 46200 150000 2000 3000 .forty four
51118 ninety a hundred and twenty 22 59200 190000 1800 2600 .67
51120 100 one hundred thirty five 25 85200 270000 1700 2400 .97
51122 one hundred ten one hundred forty five 25 87100 290000 1600 2200 one.05
51124 120 a hundred and fifty five twenty five 88400 310000 1600 2200 1.15
51126 130 170 30 111000 390000 1400 1900 one.85
51128 a hundred and forty one hundred eighty 31 112000 400000 1300 1800 2.05
51130 a hundred and fifty a hundred ninety 31 112000 400000 1200 1700 2.2
51132 one hundred sixty two hundred 31 112000 425000 1200 1700 two.35
51134 one hundred seventy 215 34 133000 500000 1100 1600 three.three
51136 180 225 34 135000 530000 a thousand 1500 three.five
51138 one hundred ninety 240 37 172000 655000 950 1400 four.05
51140 two hundred 250 37 174000 655000 950 1400 four.twenty five
51144 220 270 37 178000 735000 900 1300 four.6
51148 240 three hundred forty five 234000 965000 800 1100 seven.fifty five
51152 260 320 45 238000 1571000 800 1100 8.one
51156 280 350 fifty three 319000 1460000 700 950 twelve
51160 three hundred 380 sixty two 364000 1760000 630 850 seventeen.five
51164 320 400 63 371000 1860000 600 800 19
51168 340 420 64 377000 1960000 600 800 20
51172 360 440 sixty five 390000 2000000 560 750 21.eight
51176 380 460 65 398000 2180000 550 750 22.seventy five
51180 four hundred 480 sixty five 403000 2250000 520 720 24
ISO Dimensions (mm) Fundamental Load Score (N) Limitting pace ( r/min ) Weight
Lubrication
d D B Dyn. C Stat. C0 Grease Oil
51200 10 26 11 12700 17000 6000 8000 .031
51201 12 28 11 13300 19000 6000 8000 .034
51202 15 32 twelve 16500 25000 5300 7000 .046
51203 seventeen 35 12 17200 27500 5000 6700 .053
51204 twenty 40 14 22500 37500 4500 6000 .083
51205 25 forty seven fifteen 25500 47500 4000 5300 .eleven
51206 30 52 16 26700 50000 3600 4800 .13
51207 35 sixty two 18 35100 67000 3000 4000 .22
51208 40 68 19 46800 98000 2800 3800 .28
51209 forty five seventy three 20 39000 80000 2600 3600 .three
51210 50 78 22 49400 106000 2400 3400 .37
51211 fifty five 90 twenty five 61800 134000 1900 2800 .fifty nine
51212 60 95 26 62400 140000 1900 2800 .65
51213 65 100 27 63700 150000 1800 2600 .seventy eight
51214 70 a hundred and five 27 65000 160000 1800 2600 .seventy nine
51215 seventy five a hundred and ten 27 67600 170000 1700 2400 .83
51216 80 a hundred and fifteen 28 76100 190000 1700 2400 .91
51217 eighty five 125 31 97500 250000 1600 2200 one.two
51218 90 a hundred thirty five 35 119000 300000 1500 2000 one.7
51220 a hundred a hundred and fifty 38 124000 320000 1300 1800 2.two
51222 110 one hundred sixty 38 130000 360000 1200 1700 two.4
51224 a hundred and twenty one hundred seventy 39 140000 400000 1100 1600 2.sixty five
51226 130 a hundred ninety forty five 186000 540000 950 1400 4
51228 one hundred forty 200 46 190000 570000 950 1400 four.35
51230 a hundred and fifty 215 50 238000 735000 900 1300 6.1
51232 one hundred sixty 225 fifty one 242000 780000 850 1200 6.55
51234 a hundred and seventy 240 55 286000 930000 800 1100 8.15
51236 one hundred eighty 250 fifty six 296000 one million 800 1100 8.six
51238 one hundred ninety 270 62 332000 1160000 750 1000 eleven.seven
51240 200 280 62 338000 1220000 750 a thousand 12
51244 220 300 63 351000 1320000 seven hundred 950 thirteen
51248 240 three hundred 45 462000 1980000 600 800 23
51252 260 360 79 470000 2100000 560

Construction

Solitary-row thrust ball bearing
EPTT-row thrust ball bearing
EPTT Solitary Direction Thrust Ball EPTTs consist of two #64258at washers with raceways, balls and cage which are detachable. The washers have a #64258at seating surface area as a result they have to be embedded so that all balls are similarly loaded. EPTTs only transfer aXiHu (West EPT) Dis.al hundreds in a single path.

Cage

Steel stamping cage, EPTT solide cage(brass) Thrust ball bearings have as stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd pressed steel cage, in which the substance and software is not marked. More substantial dimension bearings use substantial brass cage to offer you much more strong solutions.

Our company:
we are skilled bearing manufacture,and have more than 30 years experence in bearing production and exporting .Adopt EPTd EPT products ,can create all measurements ball bearing and roller bearings.this kind of as deep groove ball bearing,EPTTred roller bearing,spherical roller bearing,cylindrical roller bearing angular-get in touch with ball bearing,self-anling ball bearing,pillow block bearing,thrust ball bearing,wheel hub bearing,etc .


EPTT and delivery :
1.EPTT EPTT EPTT cartons pallets

2.one manufacturer box brand name cartons pallets

three.adhere to customer’s requests

A.Plastic EPTs or Solitary Boxes ( Generally 10pcs in 1 plastic tube for steel bearings)

B.EPTTs ( No far more than 30kg for a single carton )

C. Pallet ( Typically a lot more than 400kg absolutely will use pallet )

D. Supply time :7-35 daEPTT( by sea or by air )
EPTTly,We will select the most suitable EPTT method for goods. If you have any EPTT demands for EPTT, please contact us in EPT.

SAMPLES:
one.Samples quantity: 10-one hundred sets available
2. cost-free samples. it require client pay delivery EPT
Customized
Can EPT your model bearings according to your request

Shipping and delivery:
one.Most orders will be transported inside five-10 daEPTTof payment becoming EPTd.
two.Samples, by courier as FedEx,UPS,DHL,and so on
3.Much more than 3000 set bearings, it is suggested delivered by sea (sea transportation)

MOQ for custom made design:
one.MOQ:300set bearing,Can mix various bearings.
2.MOQ:500set EPT your brand name bearings

OEM Plan:
1.We can printing your brand name (logo,artwork)on the defend or laser engraving your manufacturer on the protect
2.We can custom your EPTT in accordance to your style
three.All copyrigEPTT own by clients and we promised never disclose any data.

PAYMENT:
1 We take thirty% TT EPT ,70% harmony in opposition to the bill of lading copy. Also one hundred% IRR L/C alright
two We settle for:Paypal,Western union,Credit history Playing cards,T/T etc.

FAQ:
Q.are you investing company or manufacture?
A:we are manufacture fom EPTT,our brand name is ANR .
Q:how EPTT is your shipping time ?
A:We have enough inventory for roller bearings and ball bearings. Delivery time in 7 days. 15-25 daEPTTfor 1 container to OEM brand adhering to your request
Q: Do you give samples ? is it free or additional ?
A: Indeed, we could offer the sample for totally free cost ,please you pay out the EPT of freight.
Q: What is your payment time period?
A: We accept 30% TT EPT ,70% balance against the bill lading copy. Also one hundred% IRR L/C ok.

if you have any issue or need to have about bearing ,please feel totally free to make contact with with us !

  in Varanasi India  sales   price   shop   near me   near me shop   factory   supplier 51107 Chrom Steel Thrust Ball Bearing for Machine Spindle manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Varanasi India  sales   price   shop   near me   near me shop   factory   supplier 51107 Chrom Steel Thrust Ball Bearing for Machine Spindle manufacturer   best   Cost   Custom   Cheap   wholesaler

in Munich Germany sales price shop near me near me shop factory supplier 22307 Cc Cck Ca Cak Mbw33c3 Spherical Roller Bearing for Woodworking Machine manufacturer best Cost Custom Cheap wholesaler

  in Munich Germany  sales   price   shop   near me   near me shop   factory   supplier 22307 Cc Cck Ca Cak Mbw33c3 Spherical Roller Bearing for Woodworking Machine manufacturer   best   Cost   Custom   Cheap   wholesaler

a specialised supplier of a total variety of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers. In addition, WE CAN Generate Tailored VARIATORS, GEARED MOTORS, Electrical MOTORS AND OTHER HYDRAULIC Merchandise According TO CUSTOMERS’ DRAWINGS. we are assured to offer our buyers adaptable and diversified providers.

22307 CC/CCK CA/CAK MBW33C3 spherical roller bearing for woodworking EPT

Merchandise Description

A spherical roller bearing is a rolling-element bearing that permits rotation with minimal friction, and permits angular misalignment.
Typically these bearings support a rotating shaft in the [bore] of the interior ring that may possibly be misaligned in regard to the outer ring.
The misalignment is attainable due to the spherical inside form of the outer ring and spherical rollers.

In spite of what their title may indicate, Spherical roller bearings are not actually spherical in shape. The rolling components of spherical
Roller bearings are mostly cylindrical in condition, But have a profile that tends to make them appear like cylinders that have been slightlyover-inflated.
Spherical roller bearing employed in numerous EPT purposes, exactly where there are heavy masses, reasonable speedsand possiblymisalignment.
Spherical roller bearings have two rows of symmetrical rollers, a widespread sphered outer ring raceway and two interior ring racewaEPTinclined at an angle to the bearing aXiHu (West Lake) Dis.s. The centre point of the sphere in the outer ring raceway is at the bearing aXiHu (West Lake) Dis.s.

Application
Papermaking EPTry, EPT, railway car axle, rolling mill EPT box seat, rolling mill roller Street, crusher, shaker, printing EPTry, woodworking EPTry, numerous EPT EPT.
Constant Casting EPTs EPT Followers and Blowers
EPT and EPTs Wind Turbines
EPT Handling Maritime Propulsion and Offshore Drilling
EPT and Construction EPT Pulp and Paper Processing EPT

Spherical roller bearing

EPT Item Old Product Construction Specifications(dxDxT)mm Fat/kg
22207 3507 MB/CA/CC/EK/CK/CMW33 35x72x23 .forty three
22208 3508 MB/CA/CC/E/K/CK/CMW33 40X80X23 .55
22209 3509 MB/CA/CC/E/K/CK/CMW33 45X85X23 .fifty nine
22210 3510 MB/CA/CC/E/K/CK/CMW33 50X90X23 .sixty four
22211 3511 MB/CA/CC/E/K/CK/CMW33 55X100X25 .88
22212 3512 MB/CA/CC/E/K/CK/CMW33 60X110X28 one.19
22213 3513 MB/CA/CC/E/K/CK/CMW33 65X120X31 1.6
22214 3514 MB/CA/CC/E/K/CK/CMW33 70X125X31 one.68
22215 3515 MB/CA/CC/E/K/CK/CMW33 75X130X31 one.75
22216 3516 MB/CA/CC/E/K/CK/CMW33 80X140X33 2.twelve
22217 3517 MB/CA/CC/E/K/CK/CMW33 85X150X36 2.seventy nine
22218 3518 MB/CA/CC/E/K/CK/CMW33 90X160X40 3.seventy eight
22219 3519 MB/CA/CC/E/K/CK/CMW33 95X170X43 4.31
22220 3520 MB/CA/CC/E/K/CK/CMW33 100X180X46 5.06
22222 3522 MB/CA/CC/E/K/CK/CMW33 110X200X53 7.four
22224 3524 MB/CA/CC/E/K/CK/CMW33 120X215X58 9.267
22226 3526 MB/CA/CC/E/K/CK/CMW33 130X230X64 eleven.5
22228 3528 MB/CA/CC/E/K/CK/CMW33 140X250X68 14.five
22230 3530 MB/CA/CC/E/K/CK/CMW33 150X270X73 eighteen.four
22232 3532 MB/CA/CC/E/K/CK/CMW33 160X260X80 22.three
22234 3534 MB/CA/CC/E/K/CK/CMW33 170X310X86 28.seven
22236 3536 MB/CA/CC/E/K/CK/CMW33 180X320X86 30.5
22238 3538 MB/CA/CC/E/K/CK/CMW33 190X320X92 35.55
22240 3540 MB/CA/CC/E/K/CK/CMW33 200X360X98 forty four.seven
22244 3544 MB/CA/CC/E/K/CK/CMW33 220X400X108 sixty three
22248 3548 MB/CA/CC/E/K/CK/CMW33 240X440X120 eighty three.two
22252 3552 MB/CA/CC/E/K/CK/CMW33 260X480X130 one zero five
22256 3556 MB/CA/CC/E/K/CK/CMW33 280X500X130 126
22260 3560 MB/CA/CC/E/K/CK/CMW33 300X540X140 143
22306 3606 MB/CA/CC/E/K/CK/CMW33 30x70x22 .37
22307 3607 MB/CA/CC/E/K/CK/CMW33 35x80x31 .75
22308 3608 MB/CA/CC/E/K/CK/CMW33 40x90x33 1.07
22309 3609 MB/CA/CC/E/K/CK/CMW33 45x90x33 1.four
22310 3610 MB/CA/CC/E/K/CK/CMW33 50x110x40 one.eighty three
22311 3611 MB/CA/CC/E/K/CK/CMW33 55x120x43 2.4
22312 3612 MB/CA/CC/E/K/CK/CMW33 60x130x46 two.88
22313 3613 MB/CA/CC/E/K/CK/CMW33 65x140x48 three.fifty two
22314 3614 MB/CA/CC/E/K/CK/CMW33 70x150x51 four.21
22315 3615 MB/CA/CC/E/K/CK/CMW33 75x160x55 5.forty seven
22316 3616 MB/CA/CC/E/K/CK/CMW33 80x170x58 6.19
22317 3617 MB/CA/CC/E/K/CK/CMW33 85x180x60 7.5
22318 3618 MB/CA/CC/E/K/CK/CMW33 90x190x64 eight.96
22319 3619 MB/CA/CC/E/K/CK/CMW33 95x200x67 9.ninety three
22320 3620 MB/CA/CC/E/K/CK/CMW33 100x215x73 13
22322 3622 MB/CA/CC/E/K/CK/CMW33 110x240x80 seventeen.95
22324 3624 MB/CA/CC/E/K/CK/CMW33 120x246x80 22.four
22326 3626 MB/CA/CC/E/K/CK/CMW33 130x280x93 28.two
22328 3628 MB/CA/CC/E/K/CK/CMW33 140x300x102 35.12
22330 3630 MB/CA/CC/E/K/CK/CMW33 150x320x108 43.7
22332 3632 MB/CA/CC/E/K/CK/CMW33 160x340x114 52.two
22334 3634 MB/CA/CC/E/K/CK/CMW33 170x360x120 sixty.7

Our business:
we are specialist bearing manufacture,and have far more than 30 several years experence in bearing manufacturing and exporting .Undertake EPT EPT tools ,can create all measurements ball bearing and roller bearings.this kind of as deep groove ball bearing,EPTred roller bearing,spherical roller bearing,cylindrical roller bearing angular-contact ball bearing,self-anling ball bearing,pillow block bearing,thrust ball bearing,wheel hub bearing,and so on .


EPT and delivery :
one.EPT EPT EPT cartons pallets

2.one model box brand cartons pallets

three.comply with customer’s requests

A.Plastic Tubes or Solitary Bins ( Generally 10pcs in one plastic tube for steel bearings)

B.Cartons ( No more than 30kg for 1 carton )

C. Pallet ( Generally much more than 400kg completely will use pallet )

D. Shipping time :7-35 daEPT( by sea or by air )
EPTly,We will choose the most appropriate EPT approach for goods. If you have any EPT specifications for EPT, you should speak to us EPT.

SAMPLES:
1.Samples quantity: 10-100 sets available
two. cost-free samples. it require consumer shell out delivery EPT
Custom-made
Can personalized your model bearings in accordance to your request

Transport:
one.Most orders will be delivered within 5-ten daEPTof payment being EPTd.
two.Samples, by courier as FedEx,UPS,DHL,etc
3.Far more than 3000 established bearings, it is recommended shipped by sea (sea transportation)

MOQ for custom fashion:
one.MOQ:300set bearing,Can blend different bearings.
2.MOQ:500set customized your model bearings

OEM Plan:
one.We can printing your manufacturer (brand,artwork)on the defend or laser engraving your model on the shield
two.We can custom your EPT in accordance to your layout
3.All copyrigEPT very own by clients and we promised don’t disclose any info.

PAYMENT:
one We settle for 30% TT EPT ,70% stability in opposition to the bill of lading copy. Also 100% IRR L/C okay
2 We settle for:Paypal,Western union,Credit rating Cards,T/T and so forth.

FAQ:
Q.are you buying and selling organization or manufacture?
A:we are manufacture fom EPT,our model is ANR .
Q:how EPT is your delivery time ?
A:We have sufficient inventory for roller bearings and ball bearings. Shipping time inside of seven times. fifteen-25 daEPTfor 1 container to OEM brand adhering to your request
Q: Do you offer samples ? is it cost-free or added ?
A: Of course, we could provide the sample for cost-free charge ,make sure you you pay out the EPT of freight.
Q: What is your payment expression?
A: We acknowledge 30% TT EPT ,70% equilibrium towards the monthly bill lading duplicate. Also a hundred% IRR L/C okay.

if you have any concern or need about bearing ,please come to feel cost-free to get in touch with with us !

  in Munich Germany  sales   price   shop   near me   near me shop   factory   supplier 22307 Cc Cck Ca Cak Mbw33c3 Spherical Roller Bearing for Woodworking Machine manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Munich Germany  sales   price   shop   near me   near me shop   factory   supplier 22307 Cc Cck Ca Cak Mbw33c3 Spherical Roller Bearing for Woodworking Machine manufacturer   best   Cost   Custom   Cheap   wholesaler

in Chihuahua Mexico sales price shop near me near me shop factory supplier Zys Spherical Roller Bearing 23230caw33c3 for Mining Vibrating Screen manufacturer best Cost Custom Cheap wholesaler

  in Chihuahua Mexico  sales   price   shop   near me   near me shop   factory   supplier Zys Spherical Roller Bearing 23230caw33c3 for Mining Vibrating Screen manufacturer   best   Cost   Custom   Cheap   wholesaler

With detailed requirments, we can also create your particular made merchandise. EPG will always adhere to it company spirit of currently being sensible, innovative, effective and superb to make the prime worldwide transmission drive. Top quality and credit history are the bases that make a company alive.

ZEPTSpherical Roller EPT 23230CAW33C3 for EPT Vibrating Display screen

Software of ZYS spherical roller bearings:

Ongoing Casting EPTs

EPT Supporters and Blowers

EPT and EPTs

Wind Turbines

EPT Dealing with

Marine Propulsion and Offshore Drilling

EPT and Building EPT

Pulp and Paper Processing EPT

Spherical roller bearings have two rows of rollers that are mainly employed for withstXiHu (West Lake) Dis.Hu (West Lake) Dis. radial loads and also aXiHu (West Lake) Dis.al loads in either direction. Self-aligning roller bearings have high radial load ability, eEPTly ideal for weighty load or vibration load, but can not endure the aXiHu (West Lake) Dis.al load. Spherical roller thrust bearings have excellent self-aligning houses and can compensate for the coaXiHu (West Lake) Dis.ality mistake.

23218 Spherical Roller EPT

Item Identify Spherical Roller EPT
EPT Rating P6, P0, P5, P4, P2
EPT EPT Steel (GCr15)
Clearance C0 C1 C2 C3 C4 C5
Vibration amp Noisy Z1, Z2, Z3 V1, V2, V3
Cage Brass, Nylon, Steel
Seal ZZ, 2RS
Functions Higher EPT, Large Pace, EPT Existence, Large Dependability, Low Sound, Decrease Friction
Certification ISO 9001: 2008
EPT 1. EPT EPT EPT two. EPT EPT 3. Commercial EPT EPT
four. Personalize
Shipping Time thirty DaEPTAfter The OrEPTis Verified
Shippment 1. By Sea 2. By Air three. By Convey

EPTble listing of Spherical Roller EPT

Model Boundary Dimensions (mm) Basic Load Ranking (KN) Mass
D D B C Co Kg
21307 21307K 21307W33 35 80 21 70.70 73.30 .547
21308 21308K 21308W33 forty 90 23 87.sixty ninety two.00 .751
21309 21309K 21309W33 forty five a hundred 25 105.00 112.00 1.571
21310 21310K 21310W33 fifty 110 27 121.00 129.00 1.300
21311 21311K 21311W33 55 one hundred twenty 29 141.00 152.00 1.660
21312 21312K 21312W33 60 one hundred thirty 31 one hundred sixty five.00 a hundred seventy five.00 1.990
21313 21313K 21313W33 65 one hundred forty 33 186.00 197.00 2.450
21314 21314K 21314W33 70 150 35 206.00 223.00 2.980
21315 21315K 21315W33 75 160 37 249.00 270.00 three.630
21316 21316K 21316W33 eighty one hundred seventy 39 272.00 306.00 4.290
21317 21317K 21317W33 eighty five 180 41 297.00 351.00 5.a hundred ninety
21318 21318K 21318W33 ninety one hundred ninety 43 320.00 387.00 6.090
21319 21319K 21319W33 95 200 forty five 366.00 five hundred.00 seven.a hundred and fifty
21320 21320K 21320W33 one hundred 215 47 397.00 546.00 eight.810
21322 21322K 21322W33 one hundred ten 240 50 460.00 634.00 nine.460

Proportions Chamfer Basic Load Ratings Designation Weight Velocity restricted
mm r/min
d D B rmin Cr Cor Present EPT Kgs Grease Oil
150 225 56 2.1 338 768 23030 305710 eight.91 1700 2200
one hundred fifty 225 56 2.1 338 768 23030/W33 305710Y eight.85 1700 2200
one hundred fifty 225 seventy five two.1 564 1040 24030CC/W33 ten.5 1300 1700
a hundred and fifty 250 a hundred two.one 890 1600 24130C 457130 20.four 1000 1400
a hundred and fifty 250 100 2.one 890 1600 24130C/W33 457130Y 20 a thousand 1400
a hundred and fifty 270 seventy three three 738 1100 22230C 53530 18.9 1600 2000
a hundred and fifty 270 96 3 935 1520 23230C/W33 357130Y 24.three 1100 1500
one hundred fifty 320 108 four 1270 1850 22330CA/W33 53630HY forty one.7 1000 1400

Dimensions Chamfer Simple Load Scores Designation Fat Pace limited
mm r/min
d D B rmin Cr Cor Recent EPT Kgs Grease Oil
a hundred and sixty 240 sixty 2.1 376 825 23032 305712 13.five 1700 2200
a hundred and sixty 240 60 2.one 376 825 23032/W33 305712Y thirteen.4 1700 2200
160 240 eighty two.one 652 1230 24032C 457132 12.9 1100 1500
a hundred and sixty 240 80 2.1 652 1230 24032C/W33 457132Y twelve.eight 1100 1500
160 270 109 2.1 1040 1880 24132C 457132 twenty five.4 950 1300
a hundred and sixty 270 109 2.one 1040 1880 24132C/W33 457132Y twenty five 950 1300
one hundred sixty 290 80 three 658 1140 22232 3532 22.2 1500 1900
one hundred sixty 290 80 3 658 1140 22232/W33 3532Y 22.one 1500 1900
one hundred sixty 340 114 4 1170 1730 22332/W33 3632Y 49.nine 950 1300
Dimensions Chamfer Fundamental Load Ratings Designation Bodyweight Velocity constrained
mm r/min
d D B rmin Cr Cor Present EPT Kgs Grease Oil
170 260 67 two.one 450 1571 23034 305714 14.7 1600 2000
a hundred and seventy 260 sixty seven two.one 450 1571 23034/W33 305714Y fourteen.six 1600 2000
a hundred and seventy 280 109 2.one 700 1200 24134/W33 27 1300 1700
a hundred and seventy 310 86 4 22234 1300
one hundred seventy 310 86 four 730 1300 22234/W33 3534Y 27.two 1300 1700
one hundred seventy 310 a hundred and ten four 1160 1835 23234CA 357134H 37.1 950 1300
one hundred seventy 360 one hundred twenty 4 22334 950
170 360 a hundred and twenty 4 1200 2060 22334/W33 3634Y fifty nine.3 950 1300
Dimensions Chamfer Basic Load Rankings Designation Fat Velocity minimal
mm r/min
d D B rmin Cr Cor Existing EPT Kgs Grease Oil
one hundred eighty 280 a hundred two.one 930 1820 24036 405716 22.five 950 1300
a hundred and eighty 280 one hundred two.one 930 1820 24036/W33 405716Y 22.three 950 1300
a hundred and eighty 300 ninety six 3 695 1480 23136 305716 27.1 1100 1500
one hundred eighty 300 ninety six three 695 1480 23136/W33 305716Y 26.eight 1100 1500
one hundred eighty 300 ninety six 3 695 1480 23136/C9 305716U 27.1 1100 1500
180 300 96 three 695 1480 23136/W33YA2 305716KY 26.8 1100 1500
a hundred and eighty three hundred 96 three 695 1480 23136N 325716 26.four 1100 1500
one hundred eighty 320 86 4 750 1370 22236 3536 28.six 1300 1700
one hundred eighty 320 86 4 750 1370 22236/W33 3536Y 28.three 1300 1700
180 320 112 four 1280 2170 23236CA 357136H 39.six 900 1200
one hundred eighty 320 112 4 1280 2170 23236CA/W33 357136HY 39.five 900 1200
one hundred eighty 320 112 4 1280 2170 23236CA/W33YA2 357136HKY 39.4 900 1200
one hundred eighty 380 126 4 1430 2210 22336 3636 eighty.seven 900 1200
a hundred and eighty 380 126 four 1430 2210 22336/W33 3636Y seventy nine.nine 900 1200

Proportions Chamfer Fundamental Load Rankings Designation Fat Pace constrained
mm r/min
d D B rmin Cr Cor Current EPT Kgs Grease Oil
a hundred ninety 280 sixty seven two.five 542 978 2638 3738 thirteen.seven 1000 1400
a hundred ninety 290 seventy five two.one 626 1230 23038 305718 20.five 1300 1700
one hundred ninety 290 seventy five two.1 626 1230 23038/W33 305718Y twenty.3 1300 1700
one hundred ninety 320 128 three 1200 2100 24138CA/W33 forty two 850 1100
a hundred ninety 340 ninety two 4 1070 1650 22238CA 53538H 36 1200 1600
190 340 120 4 1410 2490 23238CA 357138H 51 850 1100
a hundred ninety 400 132 5 1400 2530 22338 3638 80.six 850 1100
a hundred ninety 400 132 5 1400 2530 22338/W33 3638Y seventy nine.seven 850 1100

Proportions Chamfer Standard Load Scores Designation Excess weight Pace minimal
mm r/min
d D B rmin Cr Cor Recent EPT Kgs Grease Oil
200 310 82 two.1 655 1310 23040 35710 26.2 1200 1600
two hundred 310 82 two.one 655 1310 23040/W33 35710Y 26 1200 1600
two hundred 310 109 two.one 900 1830 24040CA/W33 30.five 1100 1500
200 340 112 3 930 2571 23140 305710 fifty.nine 950 1300
two hundred 340 112 three 930 2571 23140/W33 305710Y 50.five 950 1300
two hundred 340 140 three 1530 2950 24140C 457140 52 800 one thousand
two hundred 340 a hundred and forty three 1530 2950 24140C/W33 457140Y 51.nine 800 1000
200 360 ninety eight four 940 1740 22240 3540 forty four.seven 1100 1500
two hundred 360 98 4 940 1740 22240/W33 3540Y forty four.2 1100 1500
two hundred 360 128 four one thousand 1800 23240/W33 3003240Y fifty six.five 950 1300
two hundred 420 114 four 1600 2600 22246 3546 sixty nine.five 750 950
200 420 138 5 1530 2720 22340 3640 95.3 850 1100
200 420 138 5 1530 2720 22340/W33 3640Y 95 850 1100

Dimensions Chamfer Basic Load Ratings Designation Excess weight Velocity restricted
mm r/min
D B rmin Cr Cor Present EPT Kgs Grease Oil
320 seventy six 3 758 1280 2644 3844 21.six one thousand 1400
370 one hundred twenty 4 1050 2350 23144 305714 54 900 1200
370 a hundred and twenty 4 1050 2350 23144/W33 305714Y 53.5 900 1200
four hundred 108 four 1200 2220 22244 3544 57.6 950 1300
400 108 four 1200 2220 22244/W33 3544Y fifty seven.one 950 1300
four hundred a hundred and forty four four 2070 3620 23244 3003244 ninety four.6 750 950
four hundred one hundred forty four 4 2070 3620 23244/W33 3003244Y ninety four.2 750 950
460 a hundred forty five 5 1700 3200 22344 3644 a hundred thirty 750 950
460 one hundred forty five 5 1700 3200 22344/W33 3644Y 129 750 950
mm Chamfer Fundamental Load Ratings Designation Excess weight r/min
D B rmin Cr Cor Current EPT Kgs Grease Oil
420 114 four 1600 2600 22246 3546 sixty nine.five 750 950
Dimensions Chamfer Simple Load Scores Designation Excess weight Speed constrained
mm r/min
D B rmin Cr Cor Present EPT Kgs Grease Oil
360 92 3 820 2060 23048 35718 37.6 1000 1400
360 ninety two three 820 2060 23048/W33 35718Y 37.4 1000 1400
360 118 3 1000 2200 24048CA/W33 41.seven 900 1200
four hundred 128 4 1200 2850 23148 305718 77.two 850 1100
400 128 4 1200 2850 23148/W33 305718Y 75.2 850 1100
400 160 four 2100 3980 24148/W33 405718Y 81.six 480 600
440 one hundred twenty 4 1870 2890 22248 3548 eighty five 900 1200
440 a hundred and sixty 4 2490 4490 23248 3003248 128 670 850
440 160 four 2490 4490 23248/W33 3003248Y 127 670 850
500 one hundred fifty five 5 1780 3250 22348 3648 154 670 850
500 a hundred and fifty five 5 1780 3250 22348/W33 3648Y 153 670 850
Dimensions Chamfer Fundamental Load Ratings Designation Bodyweight Pace minimal
mm r/min
D B rmin Cr Cor Current EPT Kgs Grease Oil
365 87 three 950 1650 2650 3750 32.2 one thousand 1400
Proportions Chamfer Standard Load Ratings Designation Bodyweight Pace constrained
mm r/min
D B rmin Cr Cor Current EPT Kgs Grease Oil
360 57 two.one 800 1500 23952CA/W33 22.five 1000 1400
four hundred 104 4 1000 2450 23052 305712 51.5 900 1200
four hundred 104 4 one thousand 2450 23052/W33 305712Y fifty one.two 900 1200
400 a hundred and forty four 1300 3000 24052CA/W33 64.four 850 1100
440 one hundred forty four 4 1450 3320 23152 305712 96 800 a thousand
440 one hundred eighty four 2660 5180 24152C/W33 457152Y 113 800 1000
480 one hundred thirty five 2160 3400 22252CA 53552H one zero five 850 1100
480 174 5 2800 4550 23252C/W33 357152Y one hundred forty 630 800
480 174 5 2800 4550 23252CA 357152H 151 630 800
480 174 five 2800 4550 23252CA/W33 357152HY 151 630 800
490 153 4 2070 3650 2652 3752 one hundred forty 670 850
540 165 6 2250 4190 22352 3652 193 630 800
540 165 6 2250 4190 22352/W33 3652Y 192 630 800
Proportions Chamfer Simple Load Scores Designation Weight Speed constrained
mm r/min
D B rmin Cr Cor Current EPT Kgs Grease Oil
380 seventy five two.1 800 1500 23956CA/W33 3113956Y 24.5 900 1200
420 106 4 1100 2680 23056 305716 sixty two 850 1100
420 106 four 1100 2680 23056/W33 305716Y sixty one.5 850 1100
420 a hundred and forty 4 1200 2800 24056CA/W33 67.2 800 a thousand
460 146 five 1590 3630 23156 305716 95.five 750 950
460 a hundred and eighty 5 2000 4100 24156CA/W33 119 750 950
500 one hundred thirty 5 1690 3380 22256 3556 126 800 a thousand
five hundred one hundred thirty 5 1690 3380 22256/W33 3556Y 124 800 1000
five hundred 176 5 2880 4900 23256 3003256 153 600 750
five hundred 176 5 2880 4900 23256/W33 3003256Y 152 600 750
580 175 6 3500 5150 22356 3656 238 600 750
580 175 six 3500 5150 22356/W33 3656Y 238 600 750
Dimensions Chamfer Basic Load Ratings Designation Weight Velocity restricted
mm r/min
D B rmin Cr Cor Present EPT Kgs Grease Oil
460 118 4 1260 3070 23060 3003160 75.2 800 one thousand
460 118 four 1260 3070 23060/W33 3003160Y 74.6 800 one thousand
460 160 4 2360 5571 24060C/W33 457160Y a hundred and one 600 750
500 a hundred and sixty 5 2670 4800 23160 3003760 134 670 850
five hundred 160 five 2670 4800 23160/W33 3003760Y 133 670 850
five hundred two hundred 5 3100 5800 24160C 457160 160 530 670
five hundred two hundred 5 3100 580 24160C/W33 457160Y 159 530 670
540 a hundred and forty 5 2610 4250 22260 3560 143 750 950
Proportions Chamfer Standard Load Rankings Designation Weight Velocity restricted
mm r/min
D B rmin Cr Cor Current EPT Kgs Grease Oil
440 90 three 1060 2390 23964K 3113964 45.one 900 1200
480 121 4 1380 3260 23064 3003164 81.five 800 a thousand
480 121 four 1380 3260 23064/W33 3003164Y eighty.9 800 a thousand
480 160 four 2440 5050 24064 4003164 103 560 seven hundred
540 218 five 3550 6650 24164 4003764 252 480 600
540 218 five 3550 6650 24164/W33 4003764Y 251 480 600
580 208 five 3900 6900 23264 3003264 260 500 630
580 208 5 3900 6900 23264/W33 3003264Y 259 500 630
Dimensions Chamfer Basic Load Rankings Designation Weight Pace minimal
mm r/min
D B rmin Cr Cor Recent EPT Kgs Grease Oil
460 ninety 3 1330 2840 23968 3003968 50.5 900 1200
520 133 five 1580 3810 23068 3003168 109 seven-hundred 900
520 133 five 1580 3810 23068/W33 3003168Y 109 seven hundred 900
520 180 5 2920 6050 24068/W33 4003168Y one hundred sixty 530 670
580 190 five 3200 6200 23168/W33 300368Y 207 five hundred 630
Proportions Chamfer Standard Load Rankings Designation Bodyweight Pace constrained
mm r/min
D B rmin Cr Cor Present EPT Kgs Grease Oil
480 ninety three 1130 2710 23972 3003972 49.one 850 1100
540 134 5 1750 4180 23072 3003172 114 670 850
540 134 five 1750 4180 23072/W33 3003172Y 114 670 850
540 one hundred eighty 5 2930 6100 24072C 457172 149 five hundred 630
540 180 five 2930 6100 24072C/W33 457172Y 148 five hundred 630
600 192 five 3800 7100 23172 305712 222 560 seven-hundred
600 192 5 3800 7100 23172/W33 305712Y 221 560 seven hundred
600 243 5 4300 8000 24172 405712 333 430 530
600 243 5 4300 8000 24172CA/W33 405712HY 338 430 530
750 224 seven.five 4180 7500 22372 3672 494 340 430
Proportions Chamfer Standard Load Scores Designation Bodyweight Speed restricted
mm r/min
D B rmin Cr Cor Existing EPT Kgs Grease Oil
520 106 4 1870 4100 23976 3003976 73.5 800 a thousand
560 135 five 2500 5100 23076 3003176 122 630 800
620 194 five 2680 6240 23176 305716 244 400 five hundred
620 194 5 2680 6240 23176/W33 305716Y 243 400 500
Proportions Chamfer Simple Load Ratings Designation Bodyweight Speed minimal
mm r/min
D B rmin Cr Cor Existing EPT Kgs Grease Oil
590 142 six 2290 4420 2680 3880 a hundred forty five four hundred 500
600 148 five 2970 5900 23080 3003180 165 600 750
600 148 5 2970 5900 23080/W33 3003180Y one hundred sixty five 600 750
650 200 6 4150 7900 23180 305710 239 380 480
650 250 six 4500 8900 24180 326 340 430
650 two hundred six 4150 7900 23180/W33 305710Y 238 380 480
720 256 six 5800 10400 23280 3003280 530 340 430
720 256 6 5800 10400 23280/W33 3003280Y 530 340 430

About ZYS

HangEPT EPT EPT Institute Co., Ltd. is a higher-tech EPTrprise EPTizing in the deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment of quotHigh-conclude, exact, EPT, EPT, Non-stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd quot bearing goods for the important units in a variety of fields of countrywide economic design. Its predecessor, HangEPT EPT EPT Institute, was estabEPTd in 1958. It is the only state-stage thorough investigation institute in EPT’s bearing business. In 1999, it EPTred EPT Countrywide EPTry Market Team Co., Ltd. and transformed into a EPT and EPT EPTrprise.

ZEPTEPT EPT EPT Handle and Assurance:

Austrian AICHELIN heat remedy tools and EPT-lifestyle heat treatment method method provide a sturdy promise for the steady and trustworthy operation of bearings.

ZEPTEPT Potential

ZEPTEPT assurance

ZEPTbearing merchandise

ZEPTEPT :

FAQ:

Q: Are you buying and selling business or maker?
A: ZEPTis bearing maker, the only first-course complete investigation institute in EPT bearing business.

Q: How do you manage quality of bearing?
A: ZEPThas estabEPTd top quality manage techniques for each and every sort of bearing and spindle. All merchandise and solutions passed ISO9001-2008 EPT Certificate.

Q: What is the MOQ?
A: It depends on the bearing type. You can send out inquiry or deliver e-mail for much more details.

Q: How about the bundle?
A: EPT EPT in EPT problem (Plastic tube carton pallet). Settle for style package when OEM.

Q: How EPT is the shipping and delivery time?
A: It will get about ten to forty times, depends on the design and quantity.

Q: How about the delivery?
A: We can prepare the cargo or you may possibly have the EPTer.

Q: Is sample avaiable?
A: Sure, sample orEPTis suitable.

Q: Can we use our very own Logo or layout on bearings?
A: Yes. OEM is appropriate. We can layout the bearing with your demands and use your personal Brand and package deal style.

  in Chihuahua Mexico  sales   price   shop   near me   near me shop   factory   supplier Zys Spherical Roller Bearing 23230caw33c3 for Mining Vibrating Screen manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Chihuahua Mexico  sales   price   shop   near me   near me shop   factory   supplier Zys Spherical Roller Bearing 23230caw33c3 for Mining Vibrating Screen manufacturer   best   Cost   Custom   Cheap   wholesaler

Car near me shop made in China – replacement parts – in Calamba Philippines Wheel Bearing Price Dd15 Serpentine Accessory Belt Tensioner Pulley for BMW 11281748131 with top quality

Car  near me shop  made in China - replacement parts -  in Calamba Philippines  Wheel Bearing Price Dd15 Serpentine Accessory Belt Tensioner Pulley for BMW 11281748131 with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Auto Part Belt Pulley for B EPT 11281748131

>>Product description

Item Name Belt Tensioner Pully
MOQ 10PCS
Packing Sortech packing or as customer’s requirement
Delivery 7days for stock item, 30-45days for producing
Shipment By sea, air or express
Warranty 24 months or 60000km

>>Product details
A drive belt tensioner assembly is made up of four main components – a base, tensioner arm, spring and idler pulley. The base is the mounting for all the EPT parts, while the tensioner spring ensures that the belt is kept pulled tight. The idler pulley then ensures that the belt moves as it should, while the tensioner arm, found on the bottom of the tensioner, is designed to counter the spring, and so allow the drive belt itself to be removed or adjusted.

Advantages of using Sortech belt tensioner replacement parts:

1.The overall design of belt tensioner ensures proper belt tension, alignment, and damping for superior performance
2.The tensioner spring is made with 55CrSi, which provides consistent tension and does not allow contamination, and enhances durability, with superior performance in corrosion resistance with the Dacromet.
3.The oil seal within the tensioner is made with ACM (Acrylic rubber), which has better performance in elasticity and friction resistance.
4.Sortech belt tensioner is backed by a 2 years/60,000 HangZhous of use warranty.

>>Car brands we supply

Sortech Auto Parts LLC main products line:
1.Suspension parts: control arms, ball joint , tie rod end,stabilizer link, shock absorber, air suspension strut
2.Brake parts:brake pads, brake disc, wheel cylinder
3.Auto rubber bushing: engine mount, shock mount, control arm bushing, stabilizer bushing
4.Engine system: camshaft,crankshaft, ignition coil
5.Oil filter, air filter, transmission filter,air conditioner filter, cabin air filter

>>Company Profile
Sortech Auto Parts LLC is a leading provider of spare parts for luxury brand vehicles
With operations in North America and China. With more than 20 years of industry
Experiences. 
We have experienced professional at our design and engineering team continuously
Developing innovative new products and refining our existing product line to keep within
The industry trends and global standards. 

>>FAQ

1. What are your packages?
The standard SORTECH branded products are packed with brand plastic bags and/or boxes, then in carton boxes. However we provide products in neutral boxes or plastic bags as well. If you have extra requirements on customized package, make sure discuss with the sales representative for details.  

2. What are your payment terms?
TT 50% deposit of product total is required to place order. Balance in full is due upon completion. Once the balance is paid, we will schedule delivery.

3. How about your delivery time?
In general, it takes 15 to 30 days after receiving your deposit. The accurate delivery time may vary on products and the quantities. 

4. Can you produce according to the samples?
Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

5. What is your sample policy?
We can supply sample if we have stock, but our customer will have to pay the sample as well as the courier charges. We will return the sample co EPT in your future order.

6. Do you te EPT all your goods before delivery?
Yes, our products are 100% tested before delivery.

7. Do you offer any warranties for your products?
For more than 20 years Sortech has been supplying quality parts for European vehicle users across the world and we are very proud to announce that Sortech parts will be backed by an industry leading 24 months or 60,000 HangZhous of use warranty. Please check with the sales for more details.

8. Do you offer after sales service?
We provide our customers with support and assistance around the globe, no matter whether they are wholesalers, individual parts retailers or independent garages. Our efficient customer portal ensures ease of use and ordering to benefit our customers. 

 We supply all kinds of chassis and engine auto spare parts for Mercedes and BMW.
If you cannot find the parts for your car model, please don’t hesitate to contact with us.

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Car  near me shop  made in China - replacement parts -  in Calamba Philippines  Wheel Bearing Price Dd15 Serpentine Accessory Belt Tensioner Pulley for BMW 11281748131 with top quality

Car  near me shop  made in China - replacement parts -  in Calamba Philippines  Wheel Bearing Price Dd15 Serpentine Accessory Belt Tensioner Pulley for BMW 11281748131 with top quality

China manufacturer & factory supplier for china in Peshawar Pakistan supplier Insert ball bearing with bearing house uc207 With high quality best price & service

China manufacturer & factory supplier for china  in Peshawar Pakistan  supplier Insert ball bearing with bearing house uc207 With high quality best price & service

guidance essential. We are aiming to meet the needs of the customers all around the planet.. a specialised supplier of a entire variety of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….

Overview

Fast Information

Relevant Industries:

Building Material Shops, Production Plant, Farms, Design works , Vitality & Mining, Food & Beverage Shops

Substance:

chrome metal, stainless steel

Certification:

ISO9001

Vibration:

Z1V1, Z2V2

Bearing Kinds:

UC SB HC SA British isles

Our goods is common exported to the United States, Germany, Australia, Russia, Spain, Hungary, Zimbabwe, Ukraine, Nigeria, Peru, Brazil, Middle and South The usa, Thailand, Pakistan, Indonesia, much more thanAssembly situation In order to established up a equipment reducer and to make it perform efficiently, the following guidelines have to be taken into account: 60 countries and locations.

Supply Capacity

Source Ability:
2000000 Piece/Parts for each Month insert bearing

Packaging & Shipping

Packaging Particulars
2. Specific Paper Box/Carton/Pallet

three. As the clients’ necessity”>1. Industrial Exporting Package deal with anti-tarnish paper/Carton/Pallet

2. Person Paper Box/Carton/Pallet

three. As the clients’ prerequisite

Port
Qingdao/Shanghai/Tianjin/Guangzhou

Online Customization

HangZhou At any time-Electrical power transmission Co. Ltd. One of branch of Ever-Energy Group – the biggest China transmisssion provider. With 1200 worker and precision products, we make large high quality items to United states of america and EU and other areas.china supplier Insert ball bearing with bearing house uc207

Insert ball bearing with bearing residence uc207

china supplier Insert ball bearing with bearing house uc207

Solution parameter

china supplier Insert ball bearing with bearing house uc207Our PTO generate shafts allow the user effortless routine maintenance. The greasing nipples on common crosses are positioned below angle to empower the person much better access. Less difficult access is also possible due to the fact of the versatile cone. We listened to the wishes of our consumers and placed the greasing nipple at extensive-angle PTO’s into the cross bearing. The other novelty, we introduced with wide-angle PTO push shafts is in line greasing. We wished to moreover simplify the routine maintenance and prolong the lifespan of joints. 

Secure Solution Top quality

Production comply with regular strictly, are exported to American for a lengthy time.

Professional employee 

Our workers are far more than 60, in which 50 % of them are engineers.

Prosperous encounter 

A lot more than 30 a long time expertise in bearings and energy transmission location, has shares in some bearing and pulley factories.

 

Inserts:

Metric bore and inch bore are the two offered.

Chrome steel stainless steel and carbon steel supplies are accessible.

Housings:

Stamped housings are obtainable.

Grey iron,ductile iron,stainless steel and plastic supplies are accessible.

Finish:painted,nickel plated.

New Products Previous Products Specification(d*D*B) Weight(kg)
UC201 90501 12×40×27.4 .21
UC202 90502 15×40×27.4 .2
UC203 90503 17×40×27.four .18
UC204 90504 20×47×31 .seventeen
UC205 90505 25×52×34 .21
UC206 90506 30×62×38.one .32
UC207 90507 35×72×42.nine .4
UC208 90508 40×80×49.two .64
UC209 90509 45×85×49.two .68
UC210 90510 50×90×51.6 .8
UC211 90511 55×100×55.six one.12
UC212 90512 60×110×65.1 1.fifty four
UC213 90513 65×120×65.1 one.86
UC214 90514 70×125×74.6 two.05
UC215 90515 75×130×77.eight two.21
UC216 90516 80×140×82.6 2.seventy nine
UC217 90517 85×150×85.seven three.38
UC218 90518 90×160×96 four.45
UC220 90520 100×180×108 four.five

Solution display

china supplier Insert ball bearing with bearing house uc207 

Pillow block bearing

Much more Product

china supplier Insert ball bearing with bearing house uc207

Firm Information

 china supplier Insert ball bearing with bearing house uc207

 

Established in Could 1979, the calendar year when China began its open policy, we are a said owned thorough organization combining “sector & trading, technological innovation & trading”. In 2002, our business transformed from state-owned organization to non-public owned organization.

Backed up by sturdy financial energy, superior facilities & technologies, and large manufacturing capacity of several factories, Xinguang has been developing rapidly in organization because its basis establish prolonged- expression and friendly connection with quite a few consumers from most locations of the entire world.Now, our staff are more than 60, in which 50 percent of them are engineers. Most likely what helps make us distinct from other buying and selling organizations is that we have a unique workers of the two businessmen and seasoned mechanical engineers, who have been working in the market for years. This feature of us acts an important part in high quality management, expense manage, and support efficiency.Bearings & electricity transmission elements are our principal export items. Our bearings, chains, sprockets, pulleys, tapered bushings, and shaft collars have been mass -exported to different nations and regions these kinds of as North The usa, Europe, Africa, South The united states and Southeast Asia.Our quality items, prompt shipping, and competitive pricing have received us much praise from the buyers. By the difficult perform of our staff by means of 30 a long time, Xinguang has become 1 of the principal exporters of bearings& electrical power transmission elements in China.

We welcome consumers from the complete world to cooperate with us. 

china supplier Insert ball bearing with bearing house uc207 

China manufacturer & factory supplier for china  in Peshawar Pakistan  supplier Insert ball bearing with bearing house uc207 With high quality best price & service

China manufacturer & factory supplier for china  in Peshawar Pakistan  supplier Insert ball bearing with bearing house uc207 With high quality best price & service

China manufacturer & factory supplier for china  in Peshawar Pakistan  supplier Insert ball bearing with bearing house uc207 With high quality best price & service

China manufacturer & factory supplier for china  in Peshawar Pakistan  supplier Insert ball bearing with bearing house uc207 With high quality best price & service

China manufacturer & factory supplier for china  in Peshawar Pakistan  supplier Insert ball bearing with bearing house uc207 With high quality best price & service

China manufacturer & factory supplier for china  in Peshawar Pakistan  supplier Insert ball bearing with bearing house uc207 With high quality best price & service

China manufacturer & factory supplier for china  in Peshawar Pakistan  supplier Insert ball bearing with bearing house uc207 With high quality best price & service