We examine each piece of bearing by ourselves just before supply. Hangzhou EPG Co.,Ltd. , was started in November, 1997. With its five wholly owned subsidiaries. Wonderful focus has been paid on environmental protection and strength preserving.
EPT From EPTT Soaked Gasoline Flowmeter And Gas Meter Movement Meter
Main performances
Name and device
| Identify and unit | Product | |
| XML-one | XML-two | |
| Drum capacity(m3) | .002(2L) | .005(5L) |
| Rated movement(m3/h) | .2(200L) | .five(500L) |
| Best circulation (m3) | a hundred | one hundred |
| Extra circulation(m3/h) | .3(300L) | .75(750L) |
| Min. scale value(m3) | .eight times10-five | .2 times10-4 |
| Typical pressure (Pa) | one thousand | 1000 |
| Accuracy in rated flow (%) | plusmn1 | plusmn1 |
| Stress in rated stream( Pa le) | 80 | 80 |
| Define dimensions(L/W/H) | 490 times264 times220 mm | 490 times264 times304 mm |
| Internet weight(Kg) | 4.five | 5.four |
Measuring medium
XML sort is standard-kind, it adopts brass materials, and EPTTly used in the scope of non-corrosive gases.
XMF kind is anticorrosive-sort, it adopts stainless steel substance, can evaluate corrosive gases.
Use
one. Place the meter on the worktable, change screws to allow blister of leveler in the centre, and maintain for a EPTT time in use.
two. Open sealed screw cap of water level controller, pull out inside wool rope.
three. In the plug jack of thermometer or manometer, inject distilled water into the meter, when redundant distilled water drain from gap of water degree controller ( often it is thoroughly clean when outflow a single fall), then set wool rope in sealed screw cap of h2o stage controller, and fasten the sealed screw cap.
4. Set up thermometer and manometer, (every single case 10Pa)
5. EPT air channel in accordance to route of fuel outlet and consumption, and sealled.
six. Open up gas valve, and then you can evaluate gas.
Attentions while making use of
1. When you use it, you have to alwaEPTTpay attention to the drinking water stage in the meter, normally it will have an effect on measuring precision.
two. When you use it, temperature ought to be maintained at 15 ~ twenty five ordmC, and the temperature is the identical as place temperature, its temperature big difference should be le two ordmC.
three. You would EPT readout in a number of months soon after the operation of the meter.
4. When stress of measuring fuel is go beyond normal stress 1 ~ 6 moments (one ~ 6 KPa), the meters can nonetheless work, at this time manometer should be removed , then use rubber plug plugs up mounting holes of manometer.
5. When flow of measuring gas is go over and above rated stream, the meters can still operate, but measuring precision will be tremendously reduced.
seven. The meter ought to not be put in in a chilly room, for concern that it will freeze inside.
8. In standard situation, examine out precision every single 12 months at lEPT.
Add-ons
1 computer of thermometer
1 personal computer of manometer
two rubber plugs
Generation flow:
Installation:
(C)company present
