Item Description
Very best Price Lower Sounds Proper Angle Planetary Reducer Gearbox
The high-precision planetary gearbox adopts Helical gear layout, and is utilised in different manage transmission fields with servo motors, such as precision machine equipment, laser cutting equipment, battery processing tools, and many others. It has the positive aspects of huge torsional rigidity and huge output torque.
Merchandise Description
Attributes:
(1) Minimal Sounds:The use of helical gear design and style,to attain a clean,fairly procedure of the reducer.
(2) Higher Precision:Backlash is 3 arcmin or much less,correct positioning.
(3) Substantial Rigidity,Higher Torque:The output shaft used big dimension,huge span double assistance bearing design and style,which improves the rigidity and torque of the reducer.
(4) Substantial Efficiency:1-stage up to ninety five% or a lot more,2-phase up to 92% or more.
(5) Maintenance-Cost-free:Minimal grease wear,can be lifetime lubrication.
(6) Sealing Impact is Great:Lubricating grease with substantial viscosity,not straightforward to separate the attributes,ip65 security course to ensure that no grease leakage.
(7) Installation Unrestrained:Can be installed arbitrarily.
(8) Vast Applicability:Relevant to any variety of servo motor.
(9) An organic and natural [integral] whole output axis.
Product Parameters
Specifications | PXR42 | PXR60 | PXR90 | PXR120 | |||
Technal Parameters | |||||||
Max. Torque | Nm | 1.5times rated torque | |||||
Emergency End Torque | Nm | 2.5times rated torque | |||||
Max. Radial Load | N | 780 | 1530 | 3300 | 6700 | ||
Max. Axial Load | N | 390 | 600 | 1500 | 3000 | ||
Torsional Rigidity | Nm/arcmin | 2.5 | six | twelve | 23 | ||
Max.Input Pace | rpm | 8000 | 8000 | 6000 | 6000 | ||
Rated Input Velocity | rpm | 4000 | 4000 | 3000 | 3000 | ||
Noise | dB | ≤56 | ≤64 | ≤66 | ≤66 | ||
Average Life Time | h | 20000 | |||||
Efficiency Of Full Load | % | L1≥95% L2≥90% | |||||
Return Backlash | P1 | L1 | arcmin | ≤3 | ≤5 | ≤5 | ≤5 |
L2 | arcmin | ≤5 | ≤7 | ≤7 | ≤7 | ||
P2 | L1 | arcmin | ≤5 | ≤8 | ≤8 | ≤8 | |
L2 | arcmin | ≤7 | ≤10 | ≤10 | ≤10 | ||
Moment Of Inertia Table | L1 | 3 | Kg*cm2 | / | .four | two.28 | six.87 |
four | Kg*cm2 | .twelve | .4 | 2.28 | six.87 | ||
five | Kg*cm2 | .09 | .4 | 2.28 | 6.87 | ||
seven | Kg*cm2 | .09 | .4 | two.28 | six.87 | ||
8 | Kg*cm2 | / | .four | one.forty five | four.seventy six | ||
10 | Kg*cm2 | .09 | .3 | one.45 | 4.76 | ||
fourteen | Kg*cm2 | / | .four | 2.28 | 6.87 | ||
20 | Kg*cm2 | / | .4 | 2.28 | six.87 | ||
L2 | twenty five | Kg*cm2 | .09 | .four | two.28 | 6.87 | |
30 | Kg*cm2 | / | .4 | 2.28 | six.87 | ||
35 | Kg*cm2 | .09 | .4 | 2.28 | six.87 | ||
40 | Kg*cm2 | .09 | .four | two.28 | six.87 | ||
50 | Kg*cm2 | .09 | .three | one.forty five | 4.seventy six | ||
70 | Kg*cm2 | .09 | .3 | 1.forty five | 4.76 | ||
a hundred | Kg*cm2 | .07 | .3 | 1.45 | 4.seventy six | ||
Complex Parameter | Degree | Ratio | PXR42 | PXR60 | PXR90 | PXR120 | |
Rated Torque | L1 | three | Nm | / | forty | one hundred and five | one hundred sixty five |
four | Nm | seventeen | forty five | 130 | 230 | ||
5 | Nm | fifteen | forty five | one hundred thirty | 230 | ||
seven | Nm | twelve | 45 | 100 | 220 | ||
8 | Nm | / | 45 | 90 | 200 | ||
ten | Nm | 10 | forty five | one hundred thirty | 230 | ||
14 | Nm | / | 45 | 100 | 220 | ||
20 | Nm | / | 30 | 75 | 175 | ||
L2 | 25 | Nm | 15 | forty five | a hundred thirty | 230 | |
thirty | Nm | / | forty | one hundred and five | one hundred sixty five | ||
35 | Nm | 15 | 45 | a hundred thirty | 230 | ||
forty | Nm | seventeen | forty five | one hundred thirty | 230 | ||
50 | Nm | 15 | 45 | 130 | 230 | ||
70 | Nm | twelve | 45 | a hundred thirty | 230 | ||
100 | Nm | 15 | forty six | 130 | 230 | ||
Degree Of Safety | IP65 | ||||||
Operation Temprature | ºC | – 10ºC to -90ºC | |||||
Weight | L1 | kg | .7 | 2.05 | 6.forty five | thirteen.seven | |
L2 | kg | .nine | 3.15 | eight.8 | seventeen.2 |
Firm Profile
Packaging & Shipping
1. Guide time: 7-ten working days as common, 20 functioning times in occupied year, it will be based mostly on the detailed order quantity
two. Delivery: DHL/ UPS/ FEDEX/ EMS/ TNT
FAQ
1. who are we?
Hefa Group is primarily based in ZheJiang , China, start from 1998,has a 3 subsidiaries in complete.The Primary Products is planetary gearbox,timing belt pulley, helical equipment,spur equipment,gear rack,gear ring,chain wheel,hollow rotating platform,module,and so forth
2. how can we guarantee top quality?
Constantly a pre-creation sample ahead of mass manufacturing
Often ultimate Inspection before cargo
3. how to pick the suitable planetary gearbox?
Initial of all,we need to have you to be in a position to provide appropriate parameters.If you have a motor drawing,it will enable us suggest a ideal gearbox for you more rapidly.If not,we hope you can supply the adhering to motor parameters:output pace,output torque,voltage,recent,ip,sounds,working situations,motor size and electrical power,and so on
4. why need to you get from us not from other suppliers?
We are 22 many years encounters maker on making the gears, specializing in producing all sorts of spur/bevel/helical gear, grinding gear, equipment shaft, timing pulley, rack, planetary equipment reducer, timing belt and such transmission gear areas
5. what services can we offer?
Accepted Supply Terms: Fedex,DHL,UPS
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY
Approved Payment Type: T/T,L/C,PayPal,Western Union
Language Spoken:English,Chinese,Japanese
Application: | Machine Tool |
---|---|
Speed: | Low Speed |
Function: | Driving |
Casing Protection: | Closed Type |
Starting Mode: | Direct on-line Starting |
Certification: | ISO9001 |
###
Samples: |
US$ 210/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
---|
###
Specifications | PXR42 | PXR60 | PXR90 | PXR120 | |||
Technal Parameters | |||||||
Max. Torque | Nm | 1.5times rated torque | |||||
Emergency Stop Torque | Nm | 2.5times rated torque | |||||
Max. Radial Load | N | 780 | 1530 | 3300 | 6700 | ||
Max. Axial Load | N | 390 | 600 | 1500 | 3000 | ||
Torsional Rigidity | Nm/arcmin | 2.5 | 6 | 12 | 23 | ||
Max.Input Speed | rpm | 8000 | 8000 | 6000 | 6000 | ||
Rated Input Speed | rpm | 4000 | 4000 | 3000 | 3000 | ||
Noise | dB | ≤56 | ≤64 | ≤66 | ≤66 | ||
Average Life Time | h | 20000 | |||||
Efficiency Of Full Load | % | L1≥95% L2≥90% | |||||
Return Backlash | P1 | L1 | arcmin | ≤3 | ≤5 | ≤5 | ≤5 |
L2 | arcmin | ≤5 | ≤7 | ≤7 | ≤7 | ||
P2 | L1 | arcmin | ≤5 | ≤8 | ≤8 | ≤8 | |
L2 | arcmin | ≤7 | ≤10 | ≤10 | ≤10 | ||
Moment Of Inertia Table | L1 | 3 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 |
4 | Kg*cm2 | 0.12 | 0.4 | 2.28 | 6.87 | ||
5 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
7 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
8 | Kg*cm2 | / | 0.4 | 1.45 | 4.76 | ||
10 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
14 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
20 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
L2 | 25 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | |
30 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
35 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
40 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
50 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
70 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
100 | Kg*cm2 | 0.07 | 0.3 | 1.45 | 4.76 | ||
Technical Parameter | Level | Ratio | PXR42 | PXR60 | PXR90 | PXR120 | |
Rated Torque | L1 | 3 | Nm | / | 40 | 105 | 165 |
4 | Nm | 17 | 45 | 130 | 230 | ||
5 | Nm | 15 | 45 | 130 | 230 | ||
7 | Nm | 12 | 45 | 100 | 220 | ||
8 | Nm | / | 45 | 90 | 200 | ||
10 | Nm | 10 | 45 | 130 | 230 | ||
14 | Nm | / | 45 | 100 | 220 | ||
20 | Nm | / | 30 | 75 | 175 | ||
L2 | 25 | Nm | 15 | 45 | 130 | 230 | |
30 | Nm | / | 40 | 105 | 165 | ||
35 | Nm | 15 | 45 | 130 | 230 | ||
40 | Nm | 17 | 45 | 130 | 230 | ||
50 | Nm | 15 | 45 | 130 | 230 | ||
70 | Nm | 12 | 45 | 130 | 230 | ||
100 | Nm | 15 | 46 | 130 | 230 | ||
Degree Of Protection | IP65 | ||||||
Operation Temprature | ºC | – 10ºC to -90ºC | |||||
Weight | L1 | kg | 0.7 | 2.05 | 6.45 | 13.7 | |
L2 | kg | 0.9 | 3.15 | 8.8 | 17.2 |
Application: | Machine Tool |
---|---|
Speed: | Low Speed |
Function: | Driving |
Casing Protection: | Closed Type |
Starting Mode: | Direct on-line Starting |
Certification: | ISO9001 |
###
Samples: |
US$ 210/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
---|
###
Specifications | PXR42 | PXR60 | PXR90 | PXR120 | |||
Technal Parameters | |||||||
Max. Torque | Nm | 1.5times rated torque | |||||
Emergency Stop Torque | Nm | 2.5times rated torque | |||||
Max. Radial Load | N | 780 | 1530 | 3300 | 6700 | ||
Max. Axial Load | N | 390 | 600 | 1500 | 3000 | ||
Torsional Rigidity | Nm/arcmin | 2.5 | 6 | 12 | 23 | ||
Max.Input Speed | rpm | 8000 | 8000 | 6000 | 6000 | ||
Rated Input Speed | rpm | 4000 | 4000 | 3000 | 3000 | ||
Noise | dB | ≤56 | ≤64 | ≤66 | ≤66 | ||
Average Life Time | h | 20000 | |||||
Efficiency Of Full Load | % | L1≥95% L2≥90% | |||||
Return Backlash | P1 | L1 | arcmin | ≤3 | ≤5 | ≤5 | ≤5 |
L2 | arcmin | ≤5 | ≤7 | ≤7 | ≤7 | ||
P2 | L1 | arcmin | ≤5 | ≤8 | ≤8 | ≤8 | |
L2 | arcmin | ≤7 | ≤10 | ≤10 | ≤10 | ||
Moment Of Inertia Table | L1 | 3 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 |
4 | Kg*cm2 | 0.12 | 0.4 | 2.28 | 6.87 | ||
5 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
7 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
8 | Kg*cm2 | / | 0.4 | 1.45 | 4.76 | ||
10 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
14 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
20 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
L2 | 25 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | |
30 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
35 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
40 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
50 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
70 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
100 | Kg*cm2 | 0.07 | 0.3 | 1.45 | 4.76 | ||
Technical Parameter | Level | Ratio | PXR42 | PXR60 | PXR90 | PXR120 | |
Rated Torque | L1 | 3 | Nm | / | 40 | 105 | 165 |
4 | Nm | 17 | 45 | 130 | 230 | ||
5 | Nm | 15 | 45 | 130 | 230 | ||
7 | Nm | 12 | 45 | 100 | 220 | ||
8 | Nm | / | 45 | 90 | 200 | ||
10 | Nm | 10 | 45 | 130 | 230 | ||
14 | Nm | / | 45 | 100 | 220 | ||
20 | Nm | / | 30 | 75 | 175 | ||
L2 | 25 | Nm | 15 | 45 | 130 | 230 | |
30 | Nm | / | 40 | 105 | 165 | ||
35 | Nm | 15 | 45 | 130 | 230 | ||
40 | Nm | 17 | 45 | 130 | 230 | ||
50 | Nm | 15 | 45 | 130 | 230 | ||
70 | Nm | 12 | 45 | 130 | 230 | ||
100 | Nm | 15 | 46 | 130 | 230 | ||
Degree Of Protection | IP65 | ||||||
Operation Temprature | ºC | – 10ºC to -90ºC | |||||
Weight | L1 | kg | 0.7 | 2.05 | 6.45 | 13.7 | |
L2 | kg | 0.9 | 3.15 | 8.8 | 17.2 |
Worm gear reducer gearbox
A worm gear reducer gearbox is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.
Viscosity
A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer gearbox increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer gearbox. A worm gear reducer gearbox with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.
Self-locking function
Worm reducer gearboxes have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducer gearboxes is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducer gearboxes, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducer gearboxes are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer gearbox more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
application
The worm gear reducer gearbox market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducer gearboxes can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducer gearboxes are the most popular type of reducer gearbox. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.
cost
The cost of a worm gear reducer gearbox depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer gearbox market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer gearbox is a popular type of reducer gearbox. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer gearbox in multiple installation locations.
Another application for worm gear reducer gearboxes is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer gearbox is determined by several factors. Size and material are important. Worm gear reducer gearboxes can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
manufacturing
Agknx Transmission Ltd. manufactures premium worm gear reducer gearboxes with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer gearbox also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
editor by CX 2023-04-17