Product Description
Product Description
Product Parameters
Company Profile
Packaging & Shipping
Application: | Motor, Electric Cars, Machinery, Marine, Toy, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Coaxial |
Gear Shape: | Bevel Gear |
Step: | Stepless |
Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
|
|
---|
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by CX 2023-05-18
China manufacturer Planetary Gearbox for Automatic Device Electric Cars Engineering Machinery with Low Price worm gearbox application
Product Description
Product Description
Product Parameters
Company Profile
Packaging & Shipping
Application: | Motor, Electric Cars, Machinery, Marine, Toy, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Coaxial |
Gear Shape: | Bevel Gear |
Step: | Stepless |
Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
|
|
---|
Worm reducer gearbox – What You Need to Know
When shopping for a Worm reducer gearbox, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducer gearboxes and the applications that they can be used for. This will help you choose the right unit for your application.
Features
Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer gearbox has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer gearbox is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducer gearboxes also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.
Functions
Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.
Applications
This market report analyzes the Worm reducer gearbox market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm reducer gearbox market.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
Cost
Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.
aspect
Worm reducer gearboxes vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer gearbox should be selected according to the specific application.The worm gear reducer gearbox saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer gearbox is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer gearbox depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducer gearboxes are common. Many gear manufacturers have large stocks of these gear reducer gearboxes. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer gearbox for your application. In addition, the worm gear reducer gearbox is easy to install and maintain.
Worm gear reducer gearbox oil
Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.
editor by CX 2023-05-17
China Best Price Low Noise Right Angle Planetary Reducer Gearbox supplier
Item Description
Very best Price Lower Sounds Proper Angle Planetary Reducer Gearbox
The high-precision planetary gearbox adopts Helical gear layout, and is utilised in different manage transmission fields with servo motors, such as precision machine equipment, laser cutting equipment, battery processing tools, and many others. It has the positive aspects of huge torsional rigidity and huge output torque.
Merchandise Description
Attributes:
(1) Minimal Sounds:The use of helical gear design and style,to attain a clean,fairly procedure of the reducer.
(2) Higher Precision:Backlash is 3 arcmin or much less,correct positioning.
(3) Substantial Rigidity,Higher Torque:The output shaft used big dimension,huge span double assistance bearing design and style,which improves the rigidity and torque of the reducer.
(4) Substantial Efficiency:1-stage up to ninety five% or a lot more,2-phase up to 92% or more.
(5) Maintenance-Cost-free:Minimal grease wear,can be lifetime lubrication.
(6) Sealing Impact is Great:Lubricating grease with substantial viscosity,not straightforward to separate the attributes,ip65 security course to ensure that no grease leakage.
(7) Installation Unrestrained:Can be installed arbitrarily.
(8) Vast Applicability:Relevant to any variety of servo motor.
(9) An organic and natural [integral] whole output axis.
Product Parameters
Specifications | PXR42 | PXR60 | PXR90 | PXR120 | |||
Technal Parameters | |||||||
Max. Torque | Nm | 1.5times rated torque | |||||
Emergency End Torque | Nm | 2.5times rated torque | |||||
Max. Radial Load | N | 780 | 1530 | 3300 | 6700 | ||
Max. Axial Load | N | 390 | 600 | 1500 | 3000 | ||
Torsional Rigidity | Nm/arcmin | 2.5 | six | twelve | 23 | ||
Max.Input Pace | rpm | 8000 | 8000 | 6000 | 6000 | ||
Rated Input Velocity | rpm | 4000 | 4000 | 3000 | 3000 | ||
Noise | dB | ≤56 | ≤64 | ≤66 | ≤66 | ||
Average Life Time | h | 20000 | |||||
Efficiency Of Full Load | % | L1≥95% L2≥90% | |||||
Return Backlash | P1 | L1 | arcmin | ≤3 | ≤5 | ≤5 | ≤5 |
L2 | arcmin | ≤5 | ≤7 | ≤7 | ≤7 | ||
P2 | L1 | arcmin | ≤5 | ≤8 | ≤8 | ≤8 | |
L2 | arcmin | ≤7 | ≤10 | ≤10 | ≤10 | ||
Moment Of Inertia Table | L1 | 3 | Kg*cm2 | / | .four | two.28 | six.87 |
four | Kg*cm2 | .twelve | .4 | 2.28 | six.87 | ||
five | Kg*cm2 | .09 | .4 | 2.28 | 6.87 | ||
seven | Kg*cm2 | .09 | .4 | two.28 | six.87 | ||
8 | Kg*cm2 | / | .four | one.forty five | four.seventy six | ||
10 | Kg*cm2 | .09 | .3 | one.45 | 4.76 | ||
fourteen | Kg*cm2 | / | .four | 2.28 | 6.87 | ||
20 | Kg*cm2 | / | .4 | 2.28 | six.87 | ||
L2 | twenty five | Kg*cm2 | .09 | .four | two.28 | 6.87 | |
30 | Kg*cm2 | / | .4 | 2.28 | six.87 | ||
35 | Kg*cm2 | .09 | .4 | 2.28 | six.87 | ||
40 | Kg*cm2 | .09 | .four | two.28 | six.87 | ||
50 | Kg*cm2 | .09 | .three | one.forty five | 4.seventy six | ||
70 | Kg*cm2 | .09 | .3 | 1.forty five | 4.76 | ||
a hundred | Kg*cm2 | .07 | .3 | 1.45 | 4.seventy six | ||
Complex Parameter | Degree | Ratio | PXR42 | PXR60 | PXR90 | PXR120 | |
Rated Torque | L1 | three | Nm | / | forty | one hundred and five | one hundred sixty five |
four | Nm | seventeen | forty five | 130 | 230 | ||
5 | Nm | fifteen | forty five | one hundred thirty | 230 | ||
seven | Nm | twelve | 45 | 100 | 220 | ||
8 | Nm | / | 45 | 90 | 200 | ||
ten | Nm | 10 | forty five | one hundred thirty | 230 | ||
14 | Nm | / | 45 | 100 | 220 | ||
20 | Nm | / | 30 | 75 | 175 | ||
L2 | 25 | Nm | 15 | forty five | a hundred thirty | 230 | |
thirty | Nm | / | forty | one hundred and five | one hundred sixty five | ||
35 | Nm | 15 | 45 | a hundred thirty | 230 | ||
forty | Nm | seventeen | forty five | one hundred thirty | 230 | ||
50 | Nm | 15 | 45 | 130 | 230 | ||
70 | Nm | twelve | 45 | a hundred thirty | 230 | ||
100 | Nm | 15 | forty six | 130 | 230 | ||
Degree Of Safety | IP65 | ||||||
Operation Temprature | ºC | – 10ºC to -90ºC | |||||
Weight | L1 | kg | .7 | 2.05 | 6.forty five | thirteen.seven | |
L2 | kg | .nine | 3.15 | eight.8 | seventeen.2 |
Firm Profile
Packaging & Shipping
1. Guide time: 7-ten working days as common, 20 functioning times in occupied year, it will be based mostly on the detailed order quantity
two. Delivery: DHL/ UPS/ FEDEX/ EMS/ TNT
FAQ
1. who are we?
Hefa Group is primarily based in ZheJiang , China, start from 1998,has a 3 subsidiaries in complete.The Primary Products is planetary gearbox,timing belt pulley, helical equipment,spur equipment,gear rack,gear ring,chain wheel,hollow rotating platform,module,and so forth
2. how can we guarantee top quality?
Constantly a pre-creation sample ahead of mass manufacturing
Often ultimate Inspection before cargo
3. how to pick the suitable planetary gearbox?
Initial of all,we need to have you to be in a position to provide appropriate parameters.If you have a motor drawing,it will enable us suggest a ideal gearbox for you more rapidly.If not,we hope you can supply the adhering to motor parameters:output pace,output torque,voltage,recent,ip,sounds,working situations,motor size and electrical power,and so on
4. why need to you get from us not from other suppliers?
We are 22 many years encounters maker on making the gears, specializing in producing all sorts of spur/bevel/helical gear, grinding gear, equipment shaft, timing pulley, rack, planetary equipment reducer, timing belt and such transmission gear areas
5. what services can we offer?
Accepted Supply Terms: Fedex,DHL,UPS
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY
Approved Payment Type: T/T,L/C,PayPal,Western Union
Language Spoken:English,Chinese,Japanese
Application: | Machine Tool |
---|---|
Speed: | Low Speed |
Function: | Driving |
Casing Protection: | Closed Type |
Starting Mode: | Direct on-line Starting |
Certification: | ISO9001 |
###
Samples: |
US$ 210/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
---|
###
Specifications | PXR42 | PXR60 | PXR90 | PXR120 | |||
Technal Parameters | |||||||
Max. Torque | Nm | 1.5times rated torque | |||||
Emergency Stop Torque | Nm | 2.5times rated torque | |||||
Max. Radial Load | N | 780 | 1530 | 3300 | 6700 | ||
Max. Axial Load | N | 390 | 600 | 1500 | 3000 | ||
Torsional Rigidity | Nm/arcmin | 2.5 | 6 | 12 | 23 | ||
Max.Input Speed | rpm | 8000 | 8000 | 6000 | 6000 | ||
Rated Input Speed | rpm | 4000 | 4000 | 3000 | 3000 | ||
Noise | dB | ≤56 | ≤64 | ≤66 | ≤66 | ||
Average Life Time | h | 20000 | |||||
Efficiency Of Full Load | % | L1≥95% L2≥90% | |||||
Return Backlash | P1 | L1 | arcmin | ≤3 | ≤5 | ≤5 | ≤5 |
L2 | arcmin | ≤5 | ≤7 | ≤7 | ≤7 | ||
P2 | L1 | arcmin | ≤5 | ≤8 | ≤8 | ≤8 | |
L2 | arcmin | ≤7 | ≤10 | ≤10 | ≤10 | ||
Moment Of Inertia Table | L1 | 3 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 |
4 | Kg*cm2 | 0.12 | 0.4 | 2.28 | 6.87 | ||
5 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
7 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
8 | Kg*cm2 | / | 0.4 | 1.45 | 4.76 | ||
10 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
14 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
20 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
L2 | 25 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | |
30 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
35 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
40 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
50 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
70 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
100 | Kg*cm2 | 0.07 | 0.3 | 1.45 | 4.76 | ||
Technical Parameter | Level | Ratio | PXR42 | PXR60 | PXR90 | PXR120 | |
Rated Torque | L1 | 3 | Nm | / | 40 | 105 | 165 |
4 | Nm | 17 | 45 | 130 | 230 | ||
5 | Nm | 15 | 45 | 130 | 230 | ||
7 | Nm | 12 | 45 | 100 | 220 | ||
8 | Nm | / | 45 | 90 | 200 | ||
10 | Nm | 10 | 45 | 130 | 230 | ||
14 | Nm | / | 45 | 100 | 220 | ||
20 | Nm | / | 30 | 75 | 175 | ||
L2 | 25 | Nm | 15 | 45 | 130 | 230 | |
30 | Nm | / | 40 | 105 | 165 | ||
35 | Nm | 15 | 45 | 130 | 230 | ||
40 | Nm | 17 | 45 | 130 | 230 | ||
50 | Nm | 15 | 45 | 130 | 230 | ||
70 | Nm | 12 | 45 | 130 | 230 | ||
100 | Nm | 15 | 46 | 130 | 230 | ||
Degree Of Protection | IP65 | ||||||
Operation Temprature | ºC | – 10ºC to -90ºC | |||||
Weight | L1 | kg | 0.7 | 2.05 | 6.45 | 13.7 | |
L2 | kg | 0.9 | 3.15 | 8.8 | 17.2 |
Application: | Machine Tool |
---|---|
Speed: | Low Speed |
Function: | Driving |
Casing Protection: | Closed Type |
Starting Mode: | Direct on-line Starting |
Certification: | ISO9001 |
###
Samples: |
US$ 210/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
---|
###
Specifications | PXR42 | PXR60 | PXR90 | PXR120 | |||
Technal Parameters | |||||||
Max. Torque | Nm | 1.5times rated torque | |||||
Emergency Stop Torque | Nm | 2.5times rated torque | |||||
Max. Radial Load | N | 780 | 1530 | 3300 | 6700 | ||
Max. Axial Load | N | 390 | 600 | 1500 | 3000 | ||
Torsional Rigidity | Nm/arcmin | 2.5 | 6 | 12 | 23 | ||
Max.Input Speed | rpm | 8000 | 8000 | 6000 | 6000 | ||
Rated Input Speed | rpm | 4000 | 4000 | 3000 | 3000 | ||
Noise | dB | ≤56 | ≤64 | ≤66 | ≤66 | ||
Average Life Time | h | 20000 | |||||
Efficiency Of Full Load | % | L1≥95% L2≥90% | |||||
Return Backlash | P1 | L1 | arcmin | ≤3 | ≤5 | ≤5 | ≤5 |
L2 | arcmin | ≤5 | ≤7 | ≤7 | ≤7 | ||
P2 | L1 | arcmin | ≤5 | ≤8 | ≤8 | ≤8 | |
L2 | arcmin | ≤7 | ≤10 | ≤10 | ≤10 | ||
Moment Of Inertia Table | L1 | 3 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 |
4 | Kg*cm2 | 0.12 | 0.4 | 2.28 | 6.87 | ||
5 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
7 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
8 | Kg*cm2 | / | 0.4 | 1.45 | 4.76 | ||
10 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
14 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
20 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
L2 | 25 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | |
30 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
35 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
40 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
50 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
70 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
100 | Kg*cm2 | 0.07 | 0.3 | 1.45 | 4.76 | ||
Technical Parameter | Level | Ratio | PXR42 | PXR60 | PXR90 | PXR120 | |
Rated Torque | L1 | 3 | Nm | / | 40 | 105 | 165 |
4 | Nm | 17 | 45 | 130 | 230 | ||
5 | Nm | 15 | 45 | 130 | 230 | ||
7 | Nm | 12 | 45 | 100 | 220 | ||
8 | Nm | / | 45 | 90 | 200 | ||
10 | Nm | 10 | 45 | 130 | 230 | ||
14 | Nm | / | 45 | 100 | 220 | ||
20 | Nm | / | 30 | 75 | 175 | ||
L2 | 25 | Nm | 15 | 45 | 130 | 230 | |
30 | Nm | / | 40 | 105 | 165 | ||
35 | Nm | 15 | 45 | 130 | 230 | ||
40 | Nm | 17 | 45 | 130 | 230 | ||
50 | Nm | 15 | 45 | 130 | 230 | ||
70 | Nm | 12 | 45 | 130 | 230 | ||
100 | Nm | 15 | 46 | 130 | 230 | ||
Degree Of Protection | IP65 | ||||||
Operation Temprature | ºC | – 10ºC to -90ºC | |||||
Weight | L1 | kg | 0.7 | 2.05 | 6.45 | 13.7 | |
L2 | kg | 0.9 | 3.15 | 8.8 | 17.2 |
Worm gear reducer gearbox
A worm gear reducer gearbox is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.
Viscosity
A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer gearbox increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer gearbox. A worm gear reducer gearbox with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.
Self-locking function
Worm reducer gearboxes have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducer gearboxes is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducer gearboxes, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducer gearboxes are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer gearbox more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
application
The worm gear reducer gearbox market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducer gearboxes can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducer gearboxes are the most popular type of reducer gearbox. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.
cost
The cost of a worm gear reducer gearbox depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer gearbox market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer gearbox is a popular type of reducer gearbox. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer gearbox in multiple installation locations.
Another application for worm gear reducer gearboxes is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer gearbox is determined by several factors. Size and material are important. Worm gear reducer gearboxes can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
manufacturing
Agknx Transmission Ltd. manufactures premium worm gear reducer gearboxes with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer gearbox also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
editor by CX 2023-04-17
China Good Service Worm Speed Reducer Transmission Gearboxes in Competitive Price worm gearbox application
Product Description
Solution Description
Item Parameters
Packaging & Delivery
Firm Profile
To Be Negotiated | 1 Piece (Min. Order) |
###
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
---|---|
Hardness: | Soft Tooth Surface |
Installation: | 90 Degree |
Layout: | Coaxial |
Gear Shape: | Conical – Cylindrical Gear |
Step: | Stepless |
###
Customization: |
---|
To Be Negotiated | 1 Piece (Min. Order) |
###
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
---|---|
Hardness: | Soft Tooth Surface |
Installation: | 90 Degree |
Layout: | Coaxial |
Gear Shape: | Conical – Cylindrical Gear |
Step: | Stepless |
###
Customization: |
---|
Worm reducer gearbox – What You Need to Know
When shopping for a Worm reducer gearbox, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducer gearboxes and the applications that they can be used for. This will help you choose the right unit for your application.
Features
Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer gearbox has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer gearbox is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducer gearboxes also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.
Functions
Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.
Applications
This market report analyzes the Worm reducer gearbox market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm reducer gearbox market.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
Cost
Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.
aspect
Worm reducer gearboxes vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer gearbox should be selected according to the specific application.The worm gear reducer gearbox saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer gearbox is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer gearbox depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducer gearboxes are common. Many gear manufacturers have large stocks of these gear reducer gearboxes. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer gearbox for your application. In addition, the worm gear reducer gearbox is easy to install and maintain.
Worm gear reducer gearbox oil
Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.
editor by CX 2023-04-07
China Good Performance RV Series Worm Gearbox with Competitive Price compact worm gearbox
Item Description
Product Description
Primary Features:
one) Produced of higher high quality aluminum alloy, light bodyweight and non-rusting
2) Massive output torque and higher radiating effectiveness
three) Clean working and low sound, can function lengthy time in dreadful situation
4) Great-seeking appearance, durable service lifestyle and tiny volume
five) Appropriate for omnibearing installation
Principal Supplies:
one)housing:aluminium alloy ADC12(dimension 571-090) die cast iron HT200(measurement a hundred and ten-one hundred fifty)
two)Worm:20Cr, ZI Involute profile carbonize&quencher warmth remedy make equipment surface hardness up to fifty six-62 HRC Following precision grinding, carburization layer’s thickness between .3-.5mm.
three)Worm Wheel:wearable stannum alloy CuSn10-1
Combination Choices:
Enter:with enter shaft, With sq. flange,With IEC standard input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic include
Worm reducers are accessible with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Laptop, NMRV+UDL, NMRV+MOTORS
Detailed Photographs
Merchandise Parameters
Old Model | New Model | Ratio | Center Distance | Electrical power | Input Dia. | Output Dia. | Output Torque | Bodyweight |
RV571 | 7.5~100 | 25mm | .06KW~.12KW | Φ9 | Φ11 | 21N.m | .7kgs | |
RV030 | RW030 | 7.5~100 | 30mm | .06KW~.25KW | Φ9(Φ11) | Φ14 | 45N.m | one.2kgs |
RV040 | RW040 | seven.5~100 | 40mm | .09KW~.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
RV050 | RW050 | seven.5~100 | 50mm | .12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
RV063 | RW063 | seven.5~a hundred | 63mm | .18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
RV075 | RW075 | 7.5~one hundred | 75mm | .25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | nine.0kgs |
RV090 | RW090 | 7.5~a hundred | 90mm | .37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
RV110 | RW110 | seven.5~100 | 110mm | .55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | seven.5~a hundred | 130mm | .75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
RV150 | RW150 | 7.5~one hundred | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | eighty four.0kgs |
Exploded View:
GMRV Define Dimension:
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | 80 | ninety seven | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | thirty | 75 | 44 | six.5 | 21 | 5.five | M6*10(n=4) | 0° | 5 | 16.three | 27 |
040 | one hundred | 121.five | 70 | 60 | 18(19) | sixty | 43 | 71 | 78 | 75 | 36.5 | 70 | fifty | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
050 | a hundred and twenty | a hundred and forty four | eighty | 70 | twenty five(24) | 70 | 49 | 85 | 92 | 85 | forty three.5 | eighty | sixty | 84 | 50 | a hundred | 64 | 8.five | thirty | 7 | M8*12(n=4) | 45° | eight | 28.3(27.3) | forty |
063 | a hundred and forty four | 174 | one hundred | 85 | twenty five(28) | eighty | 67 | 103 | 112 | ninety five | fifty three | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | fifty |
075 | 172 | 205 | a hundred and twenty | ninety | 28(35) | ninety five | seventy two | 112 | a hundred and twenty | 115 | fifty seven | 112.5 | 86 | 119 | 75 | 140 | ninety three | 11 | forty | 10 | M8*14(n=8) | 45° | 8(ten) | 31.3(38.3) | sixty |
090 | 206 | 238 | 140 | a hundred | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.five | 103 | a hundred thirty five | ninety | one hundred sixty | 102 | 13 | forty five | eleven | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
110 | 255 | 295 | 170 | 115 | forty two | a hundred thirty | – | one hundred forty four | a hundred and fifty five | 165 | 74 | a hundred and sixty | 127.5 | 167.five | one hundred ten | 200 | 125 | fourteen | fifty | 14 | M10*eighteen(n=8) | 45° | 12 | 45.three | 85 |
a hundred thirty | 293 | 335 | two hundred | one hundred twenty | 45 | 180 | – | 155 | a hundred and seventy | 215 | eighty one | 179 | 146.five | 187.five | 130 | 250 | 140 | 16 | sixty | fifteen | M12*twenty(n=8) | 45° | fourteen | forty eight.8 | a hundred |
150 | 340 | four hundred | 240 | 145 | fifty | a hundred and eighty | – | 185 | two hundred | 215 | ninety six | 210 | 170 | 230 | one hundred fifty | 250 | 180 | eighteen | seventy two.five | eighteen | M12*22(n=8) | 45° | 14 | 53.eight | 120 |
Organization Profile
About CZPT Transmission:
We are a professional reducer maker positioned in HangZhou, ZHangZhoug province.
Our leading merchandise is full selection of RV571-150 worm reducers , also equipped GKM hypoid helical gearbox, GRC inline helical gearbox, Laptop models, UDL Variators and AC Motors, G3 helical equipment motor.
Products are widely used for programs this kind of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-making, construction equipment, metallurgic mine, environmental security engineering, and all sorts of automated traces, and assembly traces.
With quick shipping, excellent after-product sales support, superior producing facility, our items market well both at house and overseas. We have exported our reducers to Southeast Asia, Jap Europe and the Middle East and so on.Our aim is to build and innovate on the basis of high high quality, and generate a good track record for reducers.
Workshop:
Exhibitions:
We participate Germany Hannver Exhibition-ZheJiang PTC Truthful-Turkey Acquire Eurasia
Packaging & Shipping and delivery
Packing information:Plastic Baggage+Cartons+Picket Situations , or on ask for
Installation Instructions
To put in the reducer, it is necessary to be aware the following troubles:
1)Check out the appropriate rotation route of output shaft ahead of fitting reducer to equipment.
two)Ahead of mounting, pls verify shaft diameter, bore diameter, crucial and keyway, to be certain their dimension are not deviation In order to preserve good overall performance, also pls keep away from assembling way too tight or also free.
3)Reducer must be mounted to machines stably to avoid vibration.
four)Anytime achievable,shield the reducer from photo voltaic radiation and bad climate.
five)In the circumstance of notably prolonged time period of storage(4-6 months), if the oil seal is not immersed in lubricant within the unit, it is recommended to modify it because the rubber could stick to the shaft or could even have dropped the elasticity.
6)Painting must definitely not go more than rubber areas and the holes on breather plug if any.
7)When join with hollow or sound shaft, pls grease the joint to avoid lock or oxidation.
eight)Examine the right lubricant level through indicator if there is one.
9)Commencing need to consider spot gradually, with out instantly applying the optimum load.
ten)When making use of various of motors to match reducer directly, supporting unit is essential if motor is as well hefty.
eleven)Guarantee excellent heat dissipation by trying to keep great ventilation close to the motor admirer.
12)In the scenario of ambient temperature40ºC, pls phone the technological section.
Right after Product sales Service
1.Maintenance Time and Warranty:Inside of 1 12 months right after receiving items.
2.Other Service: Such as modeling selection manual, set up manual, and difficulty resolution information, etc.
FAQ
1.Q:Can you make as for every buyer drawing?
A: Indeed, we supply custom-made services for buyers appropriately. We can use customer’s nameplate for gearboxes.
two.Q:What is your terms of payment ?
A: 30% deposit just before manufacturing,balance T/T before supply.
3.Q:Are you a trading organization or maker?
A:We are a manufacurer with superior equipment and skilled workers.
four.Q:What is actually your creation ability?
A:8000-9000 PCS/Month
5.Q:Cost-free sample is accessible or not?
A:Sure, we can supply free of charge sample if buyer concur to pay for the courier expense
6.Q:Do you have any certificate?
A:Sure, we have CE certification and SGS certification report.
Speak to info:
Ms Lingel Pan
For any inquiries just come to feel cost-free ton contact me. A lot of thanks for your variety attention to our company!
US $10-220 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Right Angle |
Gear Shape: | Worm Gear |
Step: | Double-Step |
###
Samples: |
US$ 22/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Old Model | New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
US $10-220 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Right Angle |
Gear Shape: | Worm Gear |
Step: | Double-Step |
###
Samples: |
US$ 22/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Old Model | New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
What is a worm gear reducer gearbox?
A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
Hollow shaft worm gear reducer gearbox
The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.
Double throat worm gear
Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
Self-locking function
One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.
Heat generated by worm gears
Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
Size of worm gear reducer gearbox
Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.
editor by czh 2023-01-27
China Gear Box Price for Plastic Extruder Machine worm gearbox calculation
Item Description
Gearbox cost for plastic extruder equipment
1) Small quantity
2) Big transmission torque
3) Substantial performance
4) Minimal intake
Characteristic of gearbox :
ZLYJ gearbox sequence are transmission devices, which are specially created for solitary-screw extruder with higher precision, hard gear surface area, accompany with thrust. Adopting the specialized requirements stipulated in JB&solT9050.1-1999, all CZPT gearboxes are developed accordingly.
Main Attributes:
one. The substance of equipment is the substantial strength alloy metal, it is created by carburizing, quenching &lparand other heat treatment method), gringding method at very last. The equipment is in high precison &lpar 6 grade ) and high hardness &lpar reaches HRC54-62). In addition to, it features low sounds when working.
2. It is made up of substantial bearing capability thrust, which is done trustworthy and can face up to more substantial axial thrust.
3. All the products are treated by pressured lubrication and cooling program besides very couple of tiny specification items.
four. CZPT collection gearbox is adopted by six-side processing box. Its normal set up is horizontal, but can also be modified to vertical installation according to customer’s requirment.
5. Performance transmission, lower sounds, lengthy operaton time.
Packaging and delivery :
one.Wood case packaging.
2.We settle for T&solT Western Union. and so on .
Why select us&quest
A> lengthy time knowledge and history
B> prolonged time nitriding treatment method and heating remedy by by itself
C>advanced Fanuk series CNC laptop-managed milling devices
D>depth gap drilling device in 18meters length, which make certain the straigtnss of barrel inside of.
E> CAD drawing affirmation before start off making
F> Prompt right after sale provider
G>Land operator and registration cash twenty five, 000, 000RMB
We can source all kind of one and double screw gearbox according to your specifications, so if you have any fascination, please get in touch with us without having hesitation. We will offer you very best high quality, ideal price tag, best service and greatest interaction. Thanks&excl
Type | Spec | Input Energy&lparkw) | N&lpar enter) | N&lparoutput) | Output Torque | Permitted axial thrust of output shaft&lparKN) | Screw Diameter | Length-diameter ratio |
&lparN,tm) | ||||||||
ZLYJ | 112-eight | 5.five | 800 | one hundred | 525 | 35 | Ø35 | 25:01:00 |
133-eight | 8 | 800 | one hundred | 764 | 39 | Ø50 | twenty five:01:00 | |
146-ten | eleven | one thousand | a hundred | 1050 | 54 | Ø55 | twenty five:01:00 | |
173-ten | eighteen.five | 900 | ninety | 1962 | 110 | Ø65 | twenty five:01:00 | |
200-12.5 | 30 | one thousand | eighty | 3581 | one hundred fifty five | Ø75 | 25:01:00 | |
225-12.five | 45 | 1000 | eighty | 5371 | a hundred and eighty | Ø90 | twenty five:01:00 | |
250-sixteen | 55 | 1120 | 70 | 7503 | 192 | Ø105 | 25:01:00 | |
280-sixteen | 75 | 960 | sixty | 7643 | 258 | Ø110 | twenty five:01:00 | |
315-sixteen | 85 | 960 | sixty | 13528 | 287 | Ø120 | 25:01:00 | |
330-16 | one hundred ten | 960 | sixty | 17507 | 360 | Ø135 | twenty five:01:00 | |
375-16 | 132 | 960 | 60 | 21008 | 390 | Ø150 | 25:01:00 | |
395-16 | 185 | 960 | sixty | 29442 | 400 | Ø160 | 25:01:00 | |
420-16 | 160 | 960 | 60 | 31831 | 430 | Ø160 | twenty five:01:00 | |
420-16 | 220 | 960 | 60 | 31831 | 430 | Ø170 | 25:01:00 | |
450-20 | 213 | a thousand | 60 | 40640 | 500 | Ø160&solØ170 | 25:01:00 | |
560-seventeen | 540 | a thousand | fifty | 84034 | seven hundred | Ø200 | twenty five:01:00 | |
630-10 | 540 | a thousand | 50 | 15712 | 770 | Ø250 | 25:01:00 |
US $400-6,000 / Piece | |
1 Piece (Min. Order) |
###
Application: | Reducer |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Torque Arm Type |
Step: | Stepless |
Type: | Worm Gear Box |
Brand Name: | Pym |
###
Customization: |
Available
|
---|
###
Type | Spec | Input Power(kw) | N( enter) | N(output) | Output Torque | Permitted axial thrust of output shaft(KN) | Screw Diameter | Length-diameter ratio |
(N@m) | ||||||||
ZLYJ | 112-8 | 5.5 | 800 | 100 | 525 | 35 | Ø35 | 25:01:00 |
133-8 | 8 | 800 | 100 | 764 | 39 | Ø50 | 25:01:00 | |
146-10 | 11 | 1000 | 100 | 1050 | 54 | Ø55 | 25:01:00 | |
173-10 | 18.5 | 900 | 90 | 1962 | 110 | Ø65 | 25:01:00 | |
200-12.5 | 30 | 1000 | 80 | 3581 | 155 | Ø75 | 25:01:00 | |
225-12.5 | 45 | 1000 | 80 | 5371 | 180 | Ø90 | 25:01:00 | |
250-16 | 55 | 1120 | 70 | 7503 | 192 | Ø105 | 25:01:00 | |
280-16 | 75 | 960 | 60 | 7643 | 258 | Ø110 | 25:01:00 | |
315-16 | 85 | 960 | 60 | 13528 | 287 | Ø120 | 25:01:00 | |
330-16 | 110 | 960 | 60 | 17507 | 360 | Ø135 | 25:01:00 | |
375-16 | 132 | 960 | 60 | 21008 | 390 | Ø150 | 25:01:00 | |
395-16 | 185 | 960 | 60 | 29442 | 400 | Ø160 | 25:01:00 | |
420-16 | 160 | 960 | 60 | 31831 | 430 | Ø160 | 25:01:00 | |
420-16 | 220 | 960 | 60 | 31831 | 430 | Ø170 | 25:01:00 | |
450-20 | 213 | 1000 | 60 | 40640 | 500 | Ø160/Ø170 | 25:01:00 | |
560-17 | 540 | 1000 | 50 | 84034 | 700 | Ø200 | 25:01:00 | |
630-10 | 540 | 1000 | 50 | 103132 | 770 | Ø250 | 25:01:00 |
US $400-6,000 / Piece | |
1 Piece (Min. Order) |
###
Application: | Reducer |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Torque Arm Type |
Step: | Stepless |
Type: | Worm Gear Box |
Brand Name: | Pym |
###
Customization: |
Available
|
---|
###
Type | Spec | Input Power(kw) | N( enter) | N(output) | Output Torque | Permitted axial thrust of output shaft(KN) | Screw Diameter | Length-diameter ratio |
(N@m) | ||||||||
ZLYJ | 112-8 | 5.5 | 800 | 100 | 525 | 35 | Ø35 | 25:01:00 |
133-8 | 8 | 800 | 100 | 764 | 39 | Ø50 | 25:01:00 | |
146-10 | 11 | 1000 | 100 | 1050 | 54 | Ø55 | 25:01:00 | |
173-10 | 18.5 | 900 | 90 | 1962 | 110 | Ø65 | 25:01:00 | |
200-12.5 | 30 | 1000 | 80 | 3581 | 155 | Ø75 | 25:01:00 | |
225-12.5 | 45 | 1000 | 80 | 5371 | 180 | Ø90 | 25:01:00 | |
250-16 | 55 | 1120 | 70 | 7503 | 192 | Ø105 | 25:01:00 | |
280-16 | 75 | 960 | 60 | 7643 | 258 | Ø110 | 25:01:00 | |
315-16 | 85 | 960 | 60 | 13528 | 287 | Ø120 | 25:01:00 | |
330-16 | 110 | 960 | 60 | 17507 | 360 | Ø135 | 25:01:00 | |
375-16 | 132 | 960 | 60 | 21008 | 390 | Ø150 | 25:01:00 | |
395-16 | 185 | 960 | 60 | 29442 | 400 | Ø160 | 25:01:00 | |
420-16 | 160 | 960 | 60 | 31831 | 430 | Ø160 | 25:01:00 | |
420-16 | 220 | 960 | 60 | 31831 | 430 | Ø170 | 25:01:00 | |
450-20 | 213 | 1000 | 60 | 40640 | 500 | Ø160/Ø170 | 25:01:00 | |
560-17 | 540 | 1000 | 50 | 84034 | 700 | Ø200 | 25:01:00 | |
630-10 | 540 | 1000 | 50 | 103132 | 770 | Ø250 | 25:01:00 |
Advantages and disadvantages of worm gear reducer gearbox
If you are looking for a worm gear reducer gearbox, you have come to the right place. This article will cover the pros and cons of worm gear reducer gearboxes and discuss the different types available. You will learn about multi-head worm gear reducer gearboxes, hollow shaft worm gear reducer gearboxes as well as hypoid gear sets and motors.
Hollow shaft worm gear reducer gearbox
Hollow shaft worm gear reducer gearboxes are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducer gearboxes depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducer gearboxes are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducer gearboxes are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducer gearboxes, there are also helical gear reducer gearboxes. These reducer gearboxes can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer gearbox is that it is more efficient than a single-stage gear reducer gearbox. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducer gearboxes are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.
Multi-head worm gear reducer gearbox
The multi-head worm gear reducer gearbox is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducer gearboxes have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer gearbox to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducer gearboxes are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
Hypoid Gear Set
Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.
Hypoid gear motor
A hypoid gear motor is a good choice for a worm gear reducer gearbox as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer gearbox can provide the same output as a 1/2 hp motor driving a worm reducer gearbox. A study by Agknx compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer gearbox when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducer gearboxes run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.
R series worm gear reducer gearbox
R series worm gear reducer gearboxes have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
AGKNX Electric Worm Gear reducer gearbox
AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
editor by czh 2023-01-21
China Factory Price Wholesale Nmrv 030-150 Worm Transmission Gearbox supplier
Solution Description
Item Description
Principal Supplies:
1)housing:aluminium alloy ADC12(dimensions 571-090) die solid iron HT200(size 110-150)
2)Worm:20Cr, ZI Involute profile carbonize&quencher heat remedy make equipment surface hardness up to fifty six-sixty two HRC Following precision grinding, carburization layer’s thickness among .3-.5mm.
three)Worm Wheel:wearable stannum alloy CuSn10-one
Thorough Pictures
Mixture Choices:
Input:with input shaft, With square flange,With IEC normal input flange
Output:with torque arm, output flange, solitary output shaft, double output shaft, plastic cover
Worm reducers are obtainable with diffferent mixtures: NMRV+NMRV, NMRV+NRV, NMRV+Pc, NMRV+UDL, NMRV+MOTORS
Exploded Look at:
Merchandise Parameters
Previous Model |
New Model | Ratio | Center Distance | Power | Enter Dia. | Output Dia. | Output Torque | Fat |
RV571 | 7.5~100 | 25mm | .06KW~.12KW | Φ9 | Φ11 | 21N.m | .7kgs | |
RV030 | RW030 | seven.5~100 | 30mm | .06KW~.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
RV040 | RW040 | seven.5~one hundred | 40mm | .09KW~.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
RV050 | RW050 | seven.5~one hundred | 50mm | .12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | three.5kgs |
RV063 | RW063 | seven.5~100 | 63mm | .18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
RV075 | RW075 | seven.5~a hundred | 75mm | .25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
RV090 | RW090 | seven.5~one hundred | 90mm | .37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | thirteen.0kgs |
RV110 | RW110 | 7.5~a hundred | 110mm | .55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | seven.5~a hundred | 130mm | .75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | forty eight.0kgs |
RV150 | RW150 | seven.5~a hundred | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | eighty four.0kgs |
GMRV Outline Dimension:
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | eighty | ninety seven | fifty four | 44 | fourteen | 55 | 32 | fifty six | sixty three | 65 | 29 | 55 | forty | fifty seven | 30 | seventy five | 44 | 6.five | 21 | five.five | M6*10(n=4) | 0° | 5 | 16.three | 27 |
040 | a hundred | 121.5 | 70 | 60 | 18(19) | 60 | forty three | seventy one | seventy eight | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | six.5 | M6*10(n=4) | 45° | six | 20.8(21.8) | 35 |
050 | a hundred and twenty | a hundred and forty four | eighty | 70 | twenty five(24) | 70 | 49 | eighty five | 92 | 85 | 43.five | 80 | 60 | 84 | fifty | one hundred | 64 | 8.five | thirty | seven | M8*12(n=4) | 45° | eight | 28.3(27.3) | forty |
063 | 144 | 174 | a hundred | eighty five | twenty five(28) | eighty | sixty seven | 103 | 112 | ninety five | 53 | ninety five | seventy two | 102 | sixty three | a hundred and ten | eighty | 8.five | 36 | 8 | M8*twelve(n=8) | 45° | 8 | 28.3(31.3) | 50 |
075 | 172 | 205 | 120 | 90 | 28(35) | ninety five | seventy two | 112 | a hundred and twenty | 115 | fifty seven | 112.five | 86 | 119 | seventy five | one hundred forty | 93 | 11 | 40 | ten | M8*fourteen(n=8) | 45° | 8(10) | 31.3(38.3) | sixty |
090 | 206 | 238 | a hundred and forty | 100 | 35(38) | a hundred and ten | 74 | one hundred thirty | a hundred and forty | a hundred thirty | 67 | 129.five | 103 | one hundred thirty five | ninety | 160 | 102 | 13 | forty five | eleven | M10*16(n=8) | 45° | 10 | 38.3(forty one.3) | 70 |
one hundred ten | 255 | 295 | one hundred seventy | 115 | 42 | a hundred thirty | – | one hundred forty four | a hundred and fifty five | one hundred sixty five | seventy four | one hundred sixty | 127.five | 167.five | one hundred ten | two hundred | 125 | 14 | fifty | 14 | M10*18(n=8) | 45° | twelve | forty five.3 | 85 |
a hundred thirty | 293 | 335 | two hundred | 120 | 45 | one hundred eighty | – | a hundred and fifty five | 170 | 215 | eighty one | 179 | 146.five | 187.five | 130 | 250 | one hundred forty | 16 | sixty | 15 | M12*20(n=8) | 45° | fourteen | forty eight.8 | 100 |
150 | 340 | four hundred | 240 | a hundred forty five | 50 | 180 | – | 185 | two hundred | 215 | 96 | 210 | 170 | 230 | a hundred and fifty | 250 | a hundred and eighty | 18 | seventy two.five | 18 | M12*22(n=8) | 45° | 14 | fifty three.8 | 120 |
Firm Profile
About CZPT Transmission:
We are a professional reducer maker situated in HangZhou, ZHangZhoug province.
Our top products is full variety of RV571-one hundred fifty worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Laptop models, UDL Variators and AC Motors, G3 helical equipment motor.
Items are extensively utilized for programs such as: foodstuffs, ceramics, packing, chemical substances, pharmacy, plastics, paper-producing, construction machinery, metallurgic mine, environmental security engineering, and all varieties of automatic strains, and assembly traces.
With quickly shipping and delivery, exceptional following-product sales services, advanced producing facility, our goods offer well both at home and overseas. We have exported our reducers to Southeast Asia, Japanese Europe and Middle East and so on.Our intention is to produce and innovate on basis of large good quality, and produce a good track record for reducers.
Packing details:Plastic Luggage+Cartons+Wood Situations , or on ask for
We take part Germany Hannver Exhibition-ZheJiang PTC Honest-Turkey Win Eurasia
Logistics
After Sales Provider
1.Maintenance Time and Warranty:Inside 1 year following receiving products.
two.Other Provider: Which includes modeling selection manual, installation guidebook, and problem resolution guide, etc.
FAQ
one.Q:Can you make as per client drawing?
A: Of course, we offer you personalized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your phrases of payment ?
A: 30% deposit ahead of manufacturing,harmony T/T ahead of shipping.
three.Q:Are you a trading business or producer?
A:We are a manufacurer with advanced products and knowledgeable workers.
4.Q:What is actually your manufacturing capability?
A:8000-9000 PCS/Thirty day period
five.Q:Free sample is obtainable or not?
A:Sure, we can source totally free sample if consumer agree to spend for the courier value
6.Q:Do you have any certification?
A:Sure, we have CE certificate and SGS certificate report.
Contact info:
Ms Lingel Pan
For any queries just come to feel free of charge ton make contact with me. Many many thanks for your kind attention to our business!
US $12-220 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Right Angle |
Gear Shape: | Worm Gear |
Step: | Double-Step |
###
Samples: |
US$ 12/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Old Model |
New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
US $12-220 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Right Angle |
Gear Shape: | Worm Gear |
Step: | Double-Step |
###
Samples: |
US$ 12/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Old Model |
New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
A-Drive PWC single worm reducer gearbox
A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.
Agknx driver
Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H
X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle
RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.AGknx Single
Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single
If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.AGknx X & H
The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.
editor by czh 2023-01-07
China Worm Gear Reducer Worm Gearbox Worm Reducer Worm Gearbox Price worm gearbox advantages
Merchandise Description
Nmrv Worm Transmission Reductor Applied for Worm Velocity Gearbox
Characteristics:
(1)Large output torque
(2) Protected, reputable, inexpensive and resilient
(3) Secure transmission, quiet operation
(4) Higher heat-radiating performance, substantial carrying potential
(5) Combination of 2 solitary-action worm gear pace reducers, meeting the demands of super speed ratio
(6) Mechanical gearboxes are widely employed in the sectors,like foodstuff, ceramics, and chemical manufacturing, as effectively as packing, printing, dyeing and plastics
Technical knowledge:
(1) Motor enter electrical power:.06kw-15kw
(2) Output torque:seventeen-1971N.M
(3) Speed ratio of worm gear peed reducer: 5/ten/fifteen/twenty/twenty five/30/forty/50/sixty/80/a hundred
(4) With IEC motor input flange: 56B14/71B14/80B5/90B5
Materials:
(1) NMRV571-NMRV090: Aluminium alloy housing
(2) NMRV110-one hundred fifty: Solid iron housing
(3) Bearing: CZPT bearing & Do-it-yourself bearing
(4) Lubricant: Artificial & Mineral
(5) The content of the worm mandrel is HT250, and the worm ring gear is ZQSn10-1.
(6) With high high quality do-it-yourself bearings, assembled CZPT oil seals & loaded with large quality lubricant.
Operation&mantenance
(1)When worm pace reducer begins to perform up to200-400 hrs, its lubricant ought to be replaced.
(2)The gearbox require to substitute the oil right after 4000 hrs.
(3)Worm reduction gearbox is completely crammed with lubricant oil soon after finshed assembly.
(4)Lubricanting oil should be stored ample in the casing and checked at a mounted time.
Color:
(1) Blue / Gentle blue
(2) Silvery White
Quality control
(1) Top quality ensure: 1 year
(2) Certification of high quality: ISO9001:2000
(3) Every solution have to be analyzed prior to sending
To Be Negotiated | 1 Piece (Min. Order) |
###
Application: | Agricultural Machinery |
---|---|
Type: | Worm and Wormwheel |
Rated Power: | 0.06kw-15kw |
Worm Gear Material: | Chromium Alloy 20crmnti |
Worm Wheel Material: | Bronze Zqsn10-1 |
Speed Ratio: | 5/10/15/20/25/30/40/50/60/80/100 |
###
Customization: |
Available
|
---|
To Be Negotiated | 1 Piece (Min. Order) |
###
Application: | Agricultural Machinery |
---|---|
Type: | Worm and Wormwheel |
Rated Power: | 0.06kw-15kw |
Worm Gear Material: | Chromium Alloy 20crmnti |
Worm Wheel Material: | Bronze Zqsn10-1 |
Speed Ratio: | 5/10/15/20/25/30/40/50/60/80/100 |
###
Customization: |
Available
|
---|
How to Select a Gearbox
When you drive your vehicle, the gearbox provides you with traction and speed. The lower gear provides the most traction, while the higher gear has the most speed. Selecting the right gear for your driving conditions will help you maximize both. The right gearing will vary based on road conditions, load, and speed. Short gearing will accelerate you more quickly, while tall gearing will increase top speed. However, you should understand how to use the gearbox before driving.
Function
The function of the gearbox is to transmit rotational energy to the machine’s drive train. The ratio between input and output torque is the ratio of the torque to the speed of rotation. Gearboxes have many different functions. A gearbox may have multiple functions or one function that is used to drive several other machines. If one gear is not turning, the other will be able to turn the gearbox. This is where the gearbox gets its name.
The pitch-controlled system has an equal number of failure modes as the electrical system, accounting for a large proportion of the longest machine downtime and halt time. The relationship between mechanisms and faults is not easily modeled mathematically. Failure modes of gearboxes are shown in Fig. 3. A gearbox’s true service life is six to eight years. However, a gearbox’s fault detection process must be developed as mature technology is required to reduce the downtime and avoid catastrophic incidents.
A gearbox is a vital piece of machinery. It processes energy produced by an engine to move the machine’s parts. A gearbox’s efficiency depends on how efficiently it transfers energy. The higher the ratio, the more torque is transferred to the wheels. It is a common component of bicycles, cars, and a variety of other devices. Its four major functions include:
In addition to ensuring gearbox reliability, a gearbox’s maintainability should be evaluated in the design phase. Maintainability considerations should be integrated into the gearbox design, such as the type of spare parts available. An appropriate maintenance regime will also determine how often to replace or repair specific parts. A proper maintenance procedure will also ensure that the gearbox is accessible. Whether it is easy to access or difficult to reach, accessibility is essential.
Purpose
A car’s transmission connects the engine to the wheels, allowing a higher-speed crankshaft to provide leverage. High-torque engines are necessary for the vehicle’s starting, acceleration, and meeting road resistance. The gearbox reduces the engine’s speed and provides torque variations at the wheels. The transmission also provides reversing power, making it possible to move the vehicle backwards and forwards.
Gears transmit power from one shaft to another. The size of the gears and number of teeth determine the amount of torque the unit can transmit. A higher gear ratio means more torque, but slower speed. The gearbox’s lever moves the engaging part on the shaft. The lever also slides the gears and synchronizers into place. If the lever slips to the left or right, the engine operates in second gear.
Gearboxes need to be closely monitored to reduce the likelihood of premature failure. Various tests are available to detect defective gear teeth and increase machine reliability. Figure 1.11(a) and (b) show a gearbox with 18 teeth and a 1.5:1 transmission ratio. The input shaft is connected to a sheave and drives a “V” belt. This transmission ratio allows the gearbox to reduce the speed of the motor, while increasing torque and reducing output speed.
When it comes to speed reduction, gear box is the most common method for reducing motor torque. The torque output is directly proportional to the volume of the motor. A small gearbox, for example, can produce as much torque as a large motor with the same output speed. The same holds true for the reverse. There are hybrid drives and in-line gearboxes. Regardless of the type, knowing about the functions of a gearbox will make it easier to choose the right one for your specific application.
Application
When selecting a gearbox, the service factor must be considered. Service factor is the difference between the actual capacity of the gearbox and the value required by the application. Additional requirements for the gearbox may result in premature seal wear or overheating. The service factor should be as low as possible, as it could be the difference between the lifetime of the gearbox and its failure. In some cases, a gearbox’s service factor can be as high as 1.4, which is sufficient for most industrial applications.
China dominates the renewable energy industry, with the largest installed capacity of 1000 gigawatts and more than 2000 terawatt hours of electricity generated each year. The growth in these sectors is expected to increase the demand for gearboxes. For example, in China, wind and hydropower energy production are the major components of wind and solar power plants. The increased installation capacity indicates increased use of gearboxes for these industries. A gearbox that is not suitable for its application will not be functional, which may be detrimental to the production of products in the country.
A gearbox can be mounted in one of four different positions. The first three positions are concentric, parallel, or right angle, and the fourth position is shaft mount. A shaft mount gearbox is typically used in applications where the motor can’t be mounted via a foot. These positions are discussed in more detail below. Choosing the correct gearbox is essential in your business, but remember that a well-designed gearbox will help your bottom line.
The service factor of a gearbox is dependent on the type of load. A high shock load, for example, can cause premature failure of the gear teeth or shaft bearings. In such cases, a higher service factor is required. In other cases, a gearbox that is designed for high shock loads can withstand such loads without deteriorating its performance. Moreover, it will also reduce the cost of maintaining the gearbox over time.
Material
When choosing the material for your gearbox, you must balance the strength, durability, and cost of the design. This article will discuss the different types of materials and their respective applications and power transmission calculations. A variety of alloys are available, each of which offers its own advantages, including improved hardness and wear resistance. The following are some of the common alloys used in gears. The advantage of alloys is their competitive pricing. A gear made from one of these materials is usually stronger than its counterparts.
The carbon content of SPCC prevents the material from hardening like SS. However, thin sheets made from SPCC are often used for gears with lower strength. Because of the low carbon content, SPCC’s surface doesn’t harden as quickly as SS gears do, so soft nitriding is needed to provide hardness. However, if you want a gear that won’t rust, then you should consider SS or FCD.
In addition to cars, gearboxes are also used in the aerospace industry. They are used in space travel and are used in airplane engines. In agriculture, they are used in irrigation, pest and insect control machinery, and plowing machines. They are also used in construction equipment like cranes, bulldozers, and tractors. Gearboxes are also used in the food processing industry, including conveyor systems, kilns, and packaging machinery.
The teeth of the gears in your gearbox are important when it comes to performance. A properly meshing gear will allow the gears to achieve peak performance and withstand torque. Gear teeth are like tiny levers, and effective meshing reduces stress and slippage. A stationary parametric analysis will help you determine the quality of meshing throughout the gearing cycle. This method is often the most accurate way to determine whether your gears are meshing well.
Manufacturing
The global gear market is divided into five key regions, namely, North America, Europe, Asia Pacific, and Latin America. Among these regions, Asia Pacific is expected to generate the largest GDP, owing to rapidly growing energy demand and investments in industrial infrastructure. This region is also home to some of the largest manufacturing bases, and its continuous building of new buildings and homes will support the industry’s growth. In terms of application, gearboxes are used in construction, agricultural machinery, and transportation.
The Industrial Gearbox market is anticipated to expand during the next several years, driven by the rapid growth of the construction industry and business advancements. However, there are several challenges that hamper the growth of the industry. These include the high cost of operations and maintenance of gear units. This report covers the market size of industrial gearboxes globally, as well as their manufacturing technologies. It also includes manufacturer data for the period of 2020-2024. The report also features a discussion of market drivers and restraints.
Global health crisis and decreasing seaborne commerce have moderately adverse effects on the industry. Falling seaborne commerce has created a barrier to investment. The value of international crude oil is expected to cross USD 0 by April 2020, putting an end to new assets development and exploitation. In such a scenario, the global gearbox market will face many challenges. However, the opportunities are huge. So, the market for industrial gearboxes is expected to grow by more than 6% by 2020, thanks to the increasing number of light vehicles sold in the country.
The main shaft of a gearbox, also known as the output shaft, spins at different speeds and transfers torque to an automobile. The output shaft is splined so that a coupler and gear can be connected to it. The counter shaft and primary shaft are supported by bearings, which reduce friction in the spinning element. Another important part of a gearbox is the gears, which vary in tooth count. The number of teeth determines how much torque a gear can transfer. In addition, the gears can glide in any position.
editor by czh 2022-11-27
in Salta Argentina sales price shop near me near me shop factory supplier Servo Motor St Mounted Bkm Helical Hypoid Gearbox Supplier New Design Bevel Bkm Helical Hypoid Motor Gearbox manufacturer best Cost Custom Cheap wholesaler
We will provide best providers and higher high quality products with all sincerity. In addition, all our manufacturing techniques are in compliance with ISO9002 standards. There is a specialized centre of province degree, EPG academician operating station, experiment station for EPG put up medical professionals, and nationwide 863 system established up in EPG team. With these platforms and sturdy technical potential, the much more than four hundred experts have created all variety of specific higher precise and higher strength products, performed mould programs for important components in the automobile and countrywide industry revitalizing system, ensuing much more than 5000 designed over, amongst which 33 objects are autonomous patent engineering with 4 patent accredited .
EPT Efficiency BKM Sequence EPTT EPTcal Hypoid EPT Units
Item Description
1. Push by hypoid EPT, has large ratios.
2. Large in output torque, large effectiveness, power preserving and environmental defense.
3. Made of large top quality EPT alloy, ligEPTT in weigEPTT and non-rusting
four. EPT in working and reduced in sound, can work EPTT in dreadful circumstances.
5. Good-hunting in look, durable in services daily life and small in volume.
6. Suitable for all spherical installation, vast software and easy of use.
7. The Mounting Dimension of BKM sequence are appropriate with NMRV collection worm EPT device (A part of NMRV050 dimensions are distinct from BKM050)
8. Modular and multi-composition can meet the needs of various conditions.
Sort | BKM50,BKM63,BKM75,BKM90,BKM110 |
EPTT Phase | B: two levels |
C: 3 levels | |
Ratio | B: seven.5,ten,twelve.5,fifteen,20,25,30,forty,fifty,sixty |
C: 50,60,seventy five,a hundred,a hundred twenty five,one hundred fifty,two hundred,250,three hundred | |
Output torque | Up to 500N.m |
EPT EPTT | .twelve~5.5KW,with flange:B5 or B14 |
EPT material | EPTT alloy |
Output shaft | materials: 40Cr |
Hardness degree: 242-286HB | |
EPTcal EPT | EPT:20CrMnTi |
Hardness degree: fifty eight-62EPTC | |
EPT degree:6 grade | |
EPTT effectiveness | B:92%-94% |
C:ninety%-92% | |
Oil seal brand | SKF |
EPTT | C ampU |
Lubricant | Mineral oil or artificial oil |
Enter Pace: one thousand-1500rmp
Output Pace: 11-300rpm
Certification: ISO9001 CE
Ex EPTT:.09-132KW
Warranty: 1 Calendar year from the date of shipping and delivery
Product Title | EPT Efficiency BKM Series EPTT EPTcal Hypoid EPT Models |
The EPT EPT | 20CrMnTi |
The case EPT | Die-Solid EPTT Alloy amp Gray Forged Iron |
EPTT | EPTT or Personalized |
HS Code | 84834090 |
Product | BKM050-BKM110 |
Supply time | ten-15days |
Brand | EPT |
Application:
Ceramic Sector Glass Sector Meals Industry EPTlurgy Business Beer amp Drink Sector
EPT and dyeing Market EPT Market Warehouse Logoistics Industry EPT doing work EPTTry
environmental security tools Sector Leather-based Market Pharmacy Industry
EPTT information
EstabEPTTd in 1985, EPT EPTT EPTTRY EPTT, LTD is a substantial and new EPT EPTTrprise partaking in study, deveXiHu (West EPT) Dis.Hu (West EPT) Dis. and manufacture for EPTT amp pace variator, one particular of the director member of EPTT EPTT Association of EPTT EPTT EPTTry.
It covers much more than 40,000 sq. meters, has much more than four hundred personnel , 20% of whom are technicians, equipped with far more than three hundred sets the most EPTd precise numerical handle products, incXiHu (West EPT) Dis.Hu (West EPT) Dis. German HOFLER forming EPT grinding EPTT to increase high quality.
established up much more than thirty national sales branches to provide our buyers in time and extensively.
Our merchandise also exported to far more than thirty nations around the world primary in Europe, Asia The usa, and Africa, with substantial reputation.
EPTT handle
EPTT ampDelivery
EPTT Details: StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd carton/Pallet/StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd picket case
Supply Specifics : fifteen-30 working daEPTTupon payment
Related Solution
EPT Planetary EPTT | Robotic RV EPTT pace EPTT |
Customized made Non-stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd EPTT | UDL Collection Variator |
PYZ Series EPTcal Tooth Shaft Mounted EPTT | 8000 Collection Cycloidal EPTT |
SLT Collection Spiral EPTTl EPTT | SLSWL Sequence Worm Screw Jack |
SLP Series Planetary EPTT | SLH/SLB Series EPT EPTT EPTT |
NMRV Sequence Worm EPTT | BKM Collection EPTcal-hypoid EPTT |
SLRC Series EPTcal EPTT | SLEPTR Collection Shaft Mounted EPTT |
SLXG Series Shaft Mounted EPTT | X/B Collection Cycloidal EPTT |
SLR/SEPTT/SLK/SLS Sequence EPTcal EPTT | AC/DC EPT |
Major merchandise checklist: sixteen series incXiHu (West EPT) Dis.Hu (West EPT) Dis. SLR/SLS/SLK/SEPTT sequence hard tooth flank EPT EPTT , SLRC collection aluminium situation helical EPT EPTTs,SLHSLB sequence large EPTT velocity EPTT, SLP series planetary speed EPTT, X/B series cycloidal EPTT, SLXG sequence shaft-mounted EPT box, SLSWL collection worm screw jack, SLT series helical cone EPT box, entirely a lot more than ten,000 ratios, different specification make us at the head of domestic EPTT sector, commonly serve the mechanical EPTT field of ligEPTT amp large sector this sort of as: beer amp EPTTrage, mining EPTT, food EPTT, textile printing, rubber amp plastic material, petrochemical sector, jack-up transportation, pharmacy amp method hides, environmental defense gear.
Certification
FAQ
one.Payment Term: TT, L/C
2.Delivery time: about thirty daEPTTfrom EPT payment.
three.We settle for EPT items as for each your EPTT requirement.
4.XiHu (West EPT) Dis.hu (West EPT) Dis.traces for the Variety:Typically we can pick 1 EPTT which is suited for you with some informations from you,these kinds of as ratio/motor speed/mounting dimension/ out torque and so forth.
5.If the least orEPTTamount is in excessive of $10000, there are preferential.
Q1: What details ought to I explain to you to verify the item?
A:Product/Measurement, EPTT Ratio, Shaft instructions amp OrEPTTquantity.
Q2: What can i do if I never know which one EPT?
A:Dont worry, Deliver as a lot data as you can, our team will support you find the rigEPTT one you are searching for.
Q3: What is your item warranty period?
A:We offer you 1 calendar year warranty considering that the vessel departure day remaining EPTT.
Q4: Are you trading firm or producer ?
A: We are manufacturing facility.
Q5: How EPTT is your shipping and delivery time?
A: EPTTly it is five-ten daEPTTif the goods are in stock. or it is 15-20 daEPTTif the merchandise are not in stock, it is according to quantity.
Q6: Do you give samples ? is it free of charge or extra ?
A: Yes, we could offer you the sample for totally free charge but do not pay the EPT of freight.
Q7: What is your terms of payment ?
A: Payment lt=1000USD, a hundred% in EPT. Payment gt=1000USD, thirty% T/T in EPT ,harmony ahead of shippment.
If you have yet another query, pls feel free of charge to speak to us as underneath:
Contact Us
in Mbeya United Republic of Tanzania sales price shop near me near me shop factory supplier Parallel Shaft Helical Gearbox with Motor manufacturer best Cost Custom Cheap wholesaler
EPG has been efficiently accredited by ISO9002 Good quality Administration Technique, ISO9001 High quality Management Technique, API certification, ISO/TS16949:2002 and ISO10012 measurement management method. Our experts and engineers have 23 several years of Experience in the Bearing Industry. A lot more importantly, we make unique parts according to equipped drawings/samples and warmly welcome OEM inquiries. Merchandise Features:
EPT modular layout, fleXiHu (West EPT) Dis.ble mounting mode.
Integrated casting housing,compact dimension, secure transmitting and reduced noise degree.
Ideal oil leakage stopping helps make the good sealings and can be utilised in vast variety of sector.
Sophisticated EPT grinding and modified profile, substantial loading assist and much more protected procedure.
EPT effectiveness and preserve EPTT.
Save EPT and lower routine maintenance.
Main applied for
Harbor and shipping
EPT and transportation
Electric powered EPTT
EPTT mining
Cement and building
Paper and ligEPTT business
EPT material |
Solid iron/Ductile iron |
EPT hardness |
HBS190-240 |
EPT material |
20CrMnTi alloy steel |
Floor hardness of EPTs |
EPTC58 deg~62 deg |
EPT core hardness |
EPTC33~40 |
Input / Output shaft content |
42CrMo alloy steel |
Enter / Output shaft hardness |
EPTC25~30 |
Machining precision of EPTs |
precise grinding, 6~5 Quality |
Lubricating oil |
GB L-CKC220-460, Shell Omala220-460 |
Warmth treatment method |
tempering, cementiting, quenching, and many others. |
Effectiveness |
ninety four%~ninety six% (relies upon on the EPTT stage) |
Sounds (MAX) |
60~68dB |
Temp. rise (MAX) |
forty degC |
Temp. increase (Oil)(MAX) |
50 degC |
Vibration |
le20 microm |
Backlash |
le20Arcmin |
Brand of bearings |
EPTT prime brand bearing, EPTB/LYC/ZWZ/C ampU. Or other brand names requested, SKF, FAG, INA, NSK. |
Brand of oil seal |
NAK — EPTTiwan or other manufacturers asked for |