Product Description
PTO Shaft for Disc Mower Discbines 1340
Our PTO shaft can be adapted to the models of these agricultural machines: Hesston 1340, 1345 / some CaseIH 8312, Massy Ferguson PTD 12, New Idea 5512
Original equipment is 55N Weasler 80 degree on the tractor side and a 50 degree CV on the discbine.
Input shafts are usually 1.50″ round. Please click here with your specifications.
|
Part Number |
Tractor |
Implement |
Description |
|
14656849 |
1.375-21 |
1.5″ RD clamp |
55N 80×50 Double CV |
|
none |
1.5″ RD clamp |
55N 50 degrees CV half(implement) |
|
|
|
1.375-21 |
none |
55N 80 degrees CV half(tractor) |
The PTO shaft of agricultural machinery. In the past, the PTO shaft was connected by a square tube. When the tractor was working in the field, there was a lot of dust. After the dust entered the square tube, the square tube and the square shaft were seriously worn, and the expansion and contraction were not smooth, resulting in damage to the cross bearings at both ends. As a result, the pins at both ends of the PTO shaft are seriously worn and inconvenient to disassemble, which is easy to causes the PTO shaft to
fall off and the PTO shaft to be damaged. The agricultural machinery universal joint PTO shaft comprises a universal joint, the left universal joint is connected with a spline sleeve, the right universal joint is connected with 1 end of a spline shaft, and the spline shaft is installed in the spline sleeve, a sealing sleeve is fixed on the outer diameter of the connection between the spline sleeve and the spline shaft, the spline sleeve is provided with a grease hole, and the grease hole is provided with a grease fitting. This product is used for rotary cultivators, micro cultivators, stubble removers, beaters, sprinkler irrigation
machines, rotary rakes, and other agricultural machines and tools connected with square tube PTO shafts in agricultural production.
What is Discbine?
In fact, CZPT coined the term “Discbine,” which has become a popular name widely used to refer to any disc mower conditioner, regardless of brand. That’s not surprising, because even in harsh conditions, a true Discbine disc mower-conditioner can quickly turn a heavy CHINAMFG into a quick-drying bale or strip.
Installation of the PTO shaft
1.Apply lubricating grease (No.2 file base grease or gear oil as required) on the universal joint bearing, prepare the oil seal,put it on the cross shaft, press it into the universal joint fork, telescopic sleeve fork, and flange fork holes at the front and rear transmission shaft end respectively, and then install the cover plate and lock ring, tighten and lock it.
2.Apply grease to the telescopic sleeve of the drive shaft, then put the fork on the spline shaft of the rear PTO shaft and screw the oil seal cap.
3.Connect the flange fork of the front transmission shaft with the flange of the second PTO shaft and install the front PTO shaft on the middle support bracket of the transmission shaft. After combustion, install the cross joints at both ends of the rear transmission shaft CZPT the flange fork of the front PTO shaft and the rear axle driving gear shaft with bolts and tighten the flange fixing bolts and nuts.
4.PTO shaft spline sheath and cross shaft oil nozzle must be complete.
We Also Supply PTO Shafts
product-group/VqTESwWofuhM/PTO-Shaft-catalog-1.html
PTO Shaft Manufacturer
Ever-power covers an area of more than 12000 square CHINAMFG and employs more than 100 people. We specialize in developing, manufacturing, and selling PTO shafts, industrial universal shafts, automobile drive shafts, universal joint coupling shafts, universal joints, etc. The annual turnover is 60 million yuan and 9 million US dollars, increasing year by year. Our products enjoy a high reputation among customers in Europe, the United States, Asia, Australia, and North America. We are the top 3 professional OEM suppliers of many agricultural tool factories in the domestic market. CHINAMFG transmission shaft adheres to our “QDP” principle: quality first, rapid delivery, and competitive price. We have obtained CE, TS / 16949, and ISO9001 certification, and have systematic production equipment and a QC team to ensure our quality and delivery. We warmly welcome friends from all walks of life to visit and establish mutually beneficial long-term cooperative relations.
Company Information
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Agricultural |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying |
| Material: | Iron |
| Power Source: | Electricity |
| Weight: | 21kg |
| After-sales Service: | Installation Guide 3-Year Warranty |
How do screw jacks handle variations in temperature and harsh operating conditions?
Screw jacks are designed to handle variations in temperature and harsh operating conditions while maintaining their performance and reliability. Here’s how screw jacks handle these challenges:
- Material Selection: Screw jacks are made from materials that can withstand harsh conditions. They are often constructed using materials such as stainless steel, which offers excellent corrosion resistance and durability. This allows screw jacks to withstand exposure to moisture, chemicals, extreme temperatures, and other harsh operating conditions.
- Surface Treatments and Coatings: Screw jacks can be treated with specialized coatings or surface treatments to enhance their resistance to corrosion, wear, and environmental factors. For example, zinc plating or epoxy coatings can be applied to protect the screw jack components from rust or chemical damage. These treatments increase the longevity and reliability of the screw jacks in harsh conditions.
- Sealing Mechanisms: Screw jacks can be equipped with sealing mechanisms to protect internal components from contaminants, moisture, or dust. Seals, gaskets, or protective covers can be used to prevent the ingress of foreign substances that could affect the performance or lifespan of the screw jack. Effective sealing mechanisms ensure the integrity and functionality of the screw jack in harsh operating conditions.
- Heat Dissipation: In applications where temperature variations are significant, screw jacks can be designed with heat dissipation features. This can include the use of cooling fins, heat sinks, or ventilation systems to dissipate excess heat generated during operation. Efficient heat dissipation helps prevent overheating and ensures optimal performance of the screw jack in high-temperature environments.
- Lubrication: Proper lubrication is essential for the smooth operation and longevity of screw jacks in harsh conditions. Specialized lubricants can be used to reduce friction, protect against wear, and maintain the performance of the screw jack over time. Lubrication also helps to minimize the effects of temperature variations on the operation of the screw jack.
- Design Considerations: Screw jacks can be designed with temperature-resistant components, such as high-temperature seals or bearings, to withstand extreme temperature variations. Additionally, thermal expansion and contraction can be accounted for in the design to ensure the stability and accuracy of the screw jack’s operation underharsh conditions.
By considering these factors and incorporating appropriate design features, screw jacks can effectively handle variations in temperature and harsh operating conditions. This allows them to maintain their performance, reliability, and longevity, even in demanding industrial environments.
How do screw jacks ensure smooth and controlled linear movement of loads?
Screw jacks are designed to ensure smooth and controlled linear movement of loads. They employ several mechanisms and features that contribute to this capability. Here are some ways in which screw jacks achieve smooth and controlled linear movement:
- Threaded Screw and Nut Mechanism: Screw jacks consist of a threaded screw and a matching nut. The screw is rotated using a handle or a motor, causing it to move linearly through the nut. The thread geometry allows for smooth and controlled movement as the screw advances or retracts. The precision of the screw thread ensures that the load moves linearly without jerks or sudden changes in speed.
- Low Friction and High Efficiency: Screw jacks are designed to minimize friction and maximize efficiency. The components of the screw jack, such as the screw, nut, and bearing surfaces, are manufactured with smooth and precise finishes. This reduces frictional forces and minimizes energy losses during operation. The low friction characteristics enable smooth movement and ensure that a significant portion of the input force is translated into lifting or lowering the load.
- Load Distribution and Stability: Screw jacks are designed to distribute the load evenly across the screw thread and nut. This ensures that the load is supported and guided in a stable manner during linear movement. The load-bearing components of the screw jack, such as the housing and base, are constructed to provide adequate strength and rigidity, minimizing deflection and maintaining stability throughout the lifting or lowering process.
- Anti-Backlash Mechanisms: Backlash refers to the slight axial movement or play that can occur between the screw and the nut in a screw jack. To minimize backlash and ensure precise control, screw jacks often incorporate anti-backlash mechanisms. These mechanisms, such as preloading springs or adjustable backlash nuts, reduce or eliminate any free movement, allowing for more accurate and controlled linear motion of the load.
- Overload Protection: Screw jacks may include overload protection features to prevent damage or failure in the event of excessive loads or unexpected conditions. These features can include mechanical stops, shear pins, or overload clutches that disengage or limit the load-carrying capacity of the screw jack when predetermined limits are exceeded. Overload protection mechanisms contribute to the safe and controlled movement of loads.
By employing a threaded screw and nut mechanism, minimizing friction, ensuring load distribution and stability, incorporating anti-backlash mechanisms, and providing overload protection, screw jacks enable smooth and controlled linear movement of loads. These features make screw jacks suitable for a wide range of applications where precise positioning, lifting, or lowering with controlled speed and stability is required.
What benefits do screw jacks offer for lifting heavy loads or adjusting height?
Screw jacks offer several benefits for lifting heavy loads or adjusting height in various applications. Here are the key benefits of using screw jacks:
- High Load Capacity: Screw jacks are designed to handle heavy loads. They can provide substantial lifting capacities and are capable of lifting loads ranging from a few kilograms to several tons. The robust construction and mechanical advantage of screw jacks allow for efficient lifting and support of heavy loads.
- Precise Positioning: Screw jacks enable precise positioning of loads or height adjustment. The linear displacement achieved per rotation of the screw can be accurately controlled. This precision is beneficial in applications where precise height adjustment or load positioning is required, such as in manufacturing processes, stage setups, or equipment installations.
- Stability and Safety: Screw jacks provide stability and ensure the safety of lifted or supported loads. Once the desired height or position is reached, the self-locking nature of the screw and nut interface helps maintain the load in position without the need for continuous power or external braking mechanisms. This inherent stability reduces the risk of accidental load movement or slippage, promoting a safe working environment.
- Mechanical Advantage: Screw jacks offer a mechanical advantage due to the pitch of the screw. By increasing the pitch or using multiple-start threads, the linear displacement achieved per rotation can be increased. This allows for the lifting or lowering of heavier loads with relatively less rotational effort. The mechanical advantage provided by screw jacks can significantly reduce the required input force or power.
- Flexible Mounting Options: Screw jacks can be mounted in various configurations to suit different applications. They can be vertically mounted for lifting or adjusting height, horizontally mounted for pushing or pulling loads, or even mounted at an angle to accommodate specific requirements. This flexibility in mounting options makes screw jacks versatile and adaptable to different lifting or positioning scenarios.
- Durability and Reliability: Screw jacks are typically constructed using robust materials such as steel or cast iron, ensuring durability and long-term reliability. They are designed to withstand heavy loads, harsh environments, and frequent use. Proper maintenance and lubrication can further enhance their lifespan and performance.
- Cost-Effective Solution: Screw jacks offer a cost-effective solution for lifting heavy loads or adjusting height compared to other alternatives such as hydraulic or pneumatic systems. They have lower installation and maintenance costs, require less complex infrastructure, and can operate without the need for additional power sources or fluid systems.
In summary, screw jacks offer benefits such as high load capacity, precise positioning, stability and safety, mechanical advantage, flexible mounting options, durability and reliability, and cost-effectiveness. These advantages make screw jacks a popular choice for applications that involve lifting heavy loads or adjusting height with precision and control.
editor by CX 2024-01-04