Product Description
Main Gearbox Parts:Transmission Front Housing & Control System, Transimission Housing -Middle, Lay Shaft, Main Shaft, Idle Wheel, Sub Gearbox 1, Sub Gearbox 2, Import Shaft and Cover, Small Cover, Fork Shaft(HW19710), (HW19710)/Pump and Pipe(HW19710), Air Pipeand.
|
PART(S) NUMBER |
Part Name |
|
AZ |
Main Shaft Ass. |
|
AZ |
Lay Shaft-left |
|
AZ |
Lay Shaft-right |
|
AZ |
Small Cover Ass. |
|
WG |
Synchronizer Ring |
|
WG |
Double H Valve |
|
WG220325571 |
Pneumatic Control Valve |
|
WG |
Pressure Switch |
|
Q2881016F9 |
Set Screw |
|
WG |
Clutch Release Fork |
|
AZ |
Transmission Front Housing |
|
AZ225711005 |
Transmission Middle Housing |
|
AZ |
Lay Shaft Forth Gear |
|
WG |
Idler Shaft |
|
AZ225710040 |
Range Gear Subbox Ass. |
|
WG |
Planetary Rack |
|
AZ |
Output Shaft |
|
WG |
Fork Pendulum Block |
|
WG |
Range Block Cylinder |
|
WG225710009 |
Odometer Connector Ass. |
|
AZ |
Transmission Back Housing |
|
WG |
Synchronous Push Block |
|
WG |
Planetary Wheel |
|
WG |
Input Shaft End Cap |
|
WG |
Support Rod Ass. |
|
WG |
Sensor Drive Ring |
|
AZ |
Shift Head |
|
WG |
Gear Selection Support Shaft |
|
WG |
Oil Pump Ass. |
|
Female Screw |
Sincere to customer and in good faith of quality is our forever followed motto. It’s the basement to be a human and on business. We take all responsibility for our products and service sincerely.
Company brief introduction:
We are established in 2571. The company is located in HangZhou City, ZheJiang Province, where CZPT is located.Sincere to the customer and in good faith of quality is Deruna Heavy Truck Parts forever followed motto. It’s the basement to be a human and do business. We take all responsibility for our products and service sincerely.
Main product:
Our company specializing in the manufacturing and wholesale of China National Heavy Duty Truck, ZheJiang Heavy Duty Truck, Beiben truck, CZPT truck and its related accessories. We mainly engage in various accessories products such as truck parts, cylinder blocks, crankshafts, diesel engines.
1.Power parts, including engines and peripheral parts [such as starters, generators, superchargers, various filter elements, etc.
2. Driving Part [also called transmission part], including clutch, gearbox, transmission shaft, axle, etc.;
3. Suspension part, including front and rear steel plates and fasteners, balance shaft, thrust rod, etc.
4. Steering part, including steering gear and Horizontal pull rods, etc.
5. Electrical appliances and valve parts, including various types of electrical switches, wiring harnesses, bulbs, and various braking components (valves).
6. Control and cargo parts, namely cab and cargo compartment.
7. Frame [that is, the beam] and so on.
Overseas market at present:
Our sales have averaged over 10 years of experience in exporting, and are proficient in all processes of business operation which can efficiently fulfill customer needs.
We currently export to 37 countries, and the client partners from Russia, New Zealand, Fiji, Papua New Guinea, Malaysia, Zambia, South Sudan, United Arab Emirates, Zimbabwe, Colombia and so on. We can also help you to supply registration documents of the importing in different countries. Welcome new and regular customers to contact us to establish future business relationships and achieve common success!
Q: What if I can not provide part number for reference?A: If no part number, we can judge and quote the requested parts by engine name-plate or photos; It would be great if you could provide us with the chassis number(VIN) so that we can provide a more comprehensive analysis and accurate quote feedback based on your truck model.
Q: Can we buy 1 pcs of truck parts for quality testing?A: Yes, we are glad to send 1pcs item for quality testing if we have the truck parts of you need in stock.
Q: Do you test all your goods before delivery?A: Yes, we have 100% test before delivery.
Q: How do you make our business long-term and good relationship?A: We keep good quality and competitive price to ensure our customers benefit; We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q: How long is the production time of the goods?A: We have sufficient stock of regular specifications for immediate delivery; Non-conventional specifications generally require stocking for about 7-10 days; Large quantities order need to be in stock for about 15-20 days.
Q: What is the packing?A: Neutral packing of paper carton or wooden case. Or we customize the packaging according to your requirements
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Car, Truck |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Optional |
| Step: | Optional |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do screw jacks handle challenges like load imbalance or uneven surfaces?
Screw jacks are designed to handle challenges such as load imbalance or uneven surfaces through various mechanisms and features. Here’s how screw jacks address these challenges:
- Load Imbalance: Screw jacks can handle load imbalance by distributing the load evenly across multiple screw jacks. In applications where there is a significant load imbalance, multiple screw jacks can be used in a synchronized system. The synchronization ensures that each screw jack shares the load proportionally, preventing excessive stress on any individual screw jack.
- Self-Locking: Screw jacks have a self-locking feature that allows them to hold their position without the need for continuous power or external braking mechanisms. This self-locking capability helps maintain stability and prevents the load from shifting even in the absence of power or during power loss.
- Anti-Backlash Mechanism: To handle challenges related to backlash or unwanted movement caused by load imbalance or vibration, some screw jacks are equipped with anti-backlash mechanisms. These mechanisms minimize or eliminate the clearance between the screw and the nut, reducing the potential for backlash and ensuring precise positioning and stability.
- Flexible Mounting Options: Screw jacks offer flexible mounting options, which allow for proper alignment and compensation on uneven surfaces. Mounting brackets or couplings can be used to adapt the screw jacks to different orientations or to compensate for variations in the mounting surface. This flexibility ensures that the screw jacks can be securely installed and adjusted to accommodate uneven surfaces.
- Guidance Systems: In some cases, screw jacks may incorporate guidance systems to improve stability and alignment. These guidance systems can include linear guides or rails that guide the movement of the screw, ensuring smooth and accurate operation even when dealing with load imbalance or uneven surfaces.
By employing these mechanisms and features, screw jacks can effectively handle challenges related to load imbalance or uneven surfaces. They provide stability, precise positioning, and the ability to distribute loads evenly, making them suitable for a wide range of applications even in demanding environments.
Can you provide real-world examples of machinery or structures that use screw jacks?
Yes, screw jacks are commonly used in various machinery and structures for lifting, lowering, and positioning applications. Here are some real-world examples of machinery and structures that utilize screw jacks:
- Industrial Machinery: Screw jacks are widely used in industrial machinery and equipment. They are employed in material handling systems, assembly lines, packaging machines, and conveyors to lift or lower components, adjust working heights, or provide precise positioning. Screw jacks are also used in presses, injection molding machines, and die-casting equipment to apply controlled force or pressure.
- Construction and Infrastructure: In the construction industry, screw jacks are used in various applications. They are utilized in formwork systems to support and adjust the height of concrete molds during construction. Screw jacks are also employed in scaffolding systems to provide stability and height adjustment. In addition, they are utilized in bridge construction and maintenance to lift and position heavy components or to create temporary supports.
- Aerospace and Defense: Screw jacks find application in aerospace and defense industries. They are used in aircraft maintenance and assembly for tasks such as raising or lowering landing gear, adjusting wing flaps, or positioning aircraft components. Screw jacks are also utilized in missile launch systems, satellite deployment mechanisms, and radar systems.
- Automotive and Transportation: Screw jacks play a role in the automotive and transportation sectors. They are used in vehicle lifting systems, such as car lifts or hydraulic ramps, for maintenance and repair operations. Screw jacks are also employed in adjustable-height truck trailers, lifting platforms for disabled access vehicles, and loading dock levelers.
- Stage and Entertainment: In the stage and entertainment industry, screw jacks are utilized for stage rigging and set construction. They are employed to lift and position lighting fixtures, sound equipment, and scenery elements. Screw jacks provide precise control over the elevation and alignment of stage components, facilitating dynamic performances and efficient setup.
- Medical and Rehabilitation: Screw jacks find application in medical and rehabilitation equipment. They are used in patient lifts and adjustable hospital beds to facilitate safe patient transfers and positioning. Screw jacks also play a role in rehabilitation equipment, such as lifting platforms for physical therapy or adjustable exercise machines.
These are just a few examples of the many applications of screw jacks in various industries. The versatility, reliability, and precise control offered by screw jacks make them suitable for a wide range of machinery and structures where lifting, lowering, or positioning operations are required.
Can screw jacks be adapted for both vertical and horizontal lifting applications?
Yes, screw jacks can be adapted for both vertical and horizontal lifting applications. Screw jacks are versatile mechanical devices that can be configured and mounted in various orientations to accommodate different lifting requirements. Here’s how screw jacks can be adapted for vertical and horizontal lifting applications:
- Vertical Lifting: Screw jacks are commonly used for vertical lifting applications. In vertical lifting configurations, the screw jack is mounted in a vertical position, with the load being lifted or lowered along the vertical axis. Vertical lifting applications include lifting platforms, stage equipment, heavy machinery, and other scenarios where vertical movement is required. Screw jacks designed for vertical lifting typically feature self-locking mechanisms to ensure load stability when the screw is not being rotated. The load is supported by the screw jack’s structure, which is constructed to handle the vertical forces exerted during lifting.
- Horizontal Lifting: Screw jacks can also be adapted for horizontal lifting applications. In horizontal lifting configurations, the screw jack is mounted in a horizontal position, and the load is moved horizontally or at an angle. Horizontal lifting applications can include conveyor systems, sliding gates, adjustable workstations, and other scenarios where linear movement is required along a horizontal plane. To adapt a screw jack for horizontal lifting, additional support mechanisms may be employed to counteract the gravitational forces acting on the load. These support mechanisms can include guide rails, linear guides, or additional bracing to maintain stability and control during horizontal movement.
- Angular Lifting: Screw jacks can be further adapted for angular lifting applications where the load needs to be lifted or lowered along an inclined or diagonal plane. Angular lifting configurations require careful consideration of the load’s weight distribution, the angle of inclination, and the stability of the supporting structure. By appropriately positioning and supporting the screw jack, angular lifting applications can be achieved with precision and control.
- Mounting Flexibility: Screw jacks offer flexibility in terms of mounting options, allowing them to be adapted for various orientations. The mounting flexibility enables screw jacks to be integrated into different lifting systems and structures. Depending on the specific requirements of the application, screw jacks can be mounted using flanges, brackets, or other mounting accessories. This adaptability facilitates the use of screw jacks in both vertical and horizontal lifting applications.
In summary, screw jacks can be adapted for both vertical and horizontal lifting applications. By considering factors such as load requirements, gravitational forces, stability needs, and mounting flexibility, screw jacks can be configured and mounted to provide stable and controlled lifting in various orientations.
editor by CX 2024-03-23